What cars did the D16 come in?
Honda D16 and ZC engine. The Honda D engine was installed in various compact cars from Honda and some Rover models. It is mostly found in the Civic but also in the Integra , Logo , CRX , Stream and some other models.
Where does the trouble code go on a Honda Civic?
When the ecu sets a trouble code,the check engine light will come on and the ecu stores the code in the memory. The trouble code will remain in the memory until voltage to the ecu is disconnected. Removing the hazard fuse in the main fuse panel for 10 seconds will reset all trouble codes.
What does code 16 mean on Honda check engine light?
If any codes are present, they will blink a sequence in the MIL to indicate a system or component failure. The MIL will blink longer to represent the first digit and then will blink short for the second (for example 1 long and 6 short would be code 16).
What are the codes on the Honda OBD1?
The Most Common Honda and Acura OBD1 Codes Code Meaning Code 4 Crank position sensor Code 6 Engine coolant temperature Code 7 Throttle position sensor Code 8 Top dead center sensor
What do the sub-codes on a Honda car mean?
Honda Service Sub-Codes Sub-Code What it Means 0 Perform multi-point inspection. 1 Tires need a rotation service. 2 Replace the cabin and engine air filters 3 Replace the transmission fluid.
When the ecu sets a trouble code,the check engine light will come on and the ecu stores the code in the memory. The trouble code will remain in the memory until voltage to the ecu is disconnected. Removing the hazard fuse in the main fuse panel for 10 seconds will reset all trouble codes.
If any codes are present, they will blink a sequence in the MIL to indicate a system or component failure. The MIL will blink longer to represent the first digit and then will blink short for the second (for example 1 long and 6 short would be code 16).
How many horsepower does a Honda Civic have?
1 Manufacturer : Honda 2 Engine Displacement : 1.6 3 Model : HONDA CIVIC 4 Engine Name : D16A / ZC VTEC 5 Year : 92-95
What’s the boost pressure on a Honda Civic?
Boost pressure is 16.5 psi for a standard US Civic with a 1.5t engine and a 10.6:1 compression ratio. To reduce the temperature of intake air compressed and heated by the turbocharger, Honda’s 1.5t engine uses a more common air-to-air intercooler. After the intercooler, air goes into a plastic intake manifold.