How do I get the service engine soon light to go off?
The only way to keep the light off is to repair the problem that turned the light on before attempting to turn it off.
- Turn the ignition switch to the on position but do not start the car.
- Count seven seconds, depress the gas pedal and hold it down for 10 seconds or until the service engine soon light begins flashing.
What does service engine soon mean on a 2002 Nissan Altima?
Oh, No! The purpose of the “service engine soon” light is to warn the operator that sensors in the vehicle have detected a malfunction. The “service engine soon” light could just indicate a faulty gas cap.
How do you clear a code on a 2002 Nissan Altima?
You can clear the code (and the annoying MIL) by holding down the accelerator pedal for more than 10 seconds while in Diagnostic Test Mode II. When you release the pedal, the ECM erases the trouble code(s).
How do you reset the service engine soon light on a Nissan Altima?
Depress and release the gas pedal five times in five seconds, then let the pedal up. Count seven seconds and then depress the gas pedal and hold it down for 10 seconds. As soon as the service engine soon light starts flashing trouble codes, let the pedal up.
Will the service engine soon light reset itself?
Your car’s check engine light will reset itself after you repair the problem in most car models. But it may take some time. A car usually needs 10-20 successful cycles before it will reset the check engine light by itself. Therefore it’s much easier to reset the check engine light with an OBD2 scanner.
Why does my Nissan Altima say service engine soon?
If the check engine light or service engine soon light is flashing, it could indicate a critical issue. The problem may be an engine misfire that could damage the catalytic converters. In the case of a blinking check engine light, it is strongly recommended that you have your vehicle serviced immediately.
What does service engine soon mean on Nissan Altima?
How do I reset my Nissan check engine light?
To do that, follow these easy steps:
- Turn off your car’s ignition.
- Put on safety goggles and gloves.
- Locate the negative terminal of your car’s battery.
- Loosen the nut on the negative battery terminal with a wrench, then pull the connector off the battery.
- Reconnect the negative cable and re-tighten it.
Is it safe to drive with the service engine soon light on?
That having been said, you can probably drive safely with the service engine soon light on, as long as it is on solid and not flashing. If the service engine light is flashing, you should pull over immediately and call for roadside service and have the vehicle towed to the mechanic.
What does service engine soon light mean on Nissan Altima?
Your Nissan Altima’s service engine soon light is there to let you know that some sort of problem has been detected with the vehicle. Any vehicles made in 1996 or newer use OBDII codes, which can easily be retrieved from a good code scanner. A flashing service engine soon light is telling you that something needs immediate attention.
How to reset engine oil service due now Nissan Altima?
Learn how to reset the “Engine Oil Service due now” notification message on the Nissan Altima with this tutorial. Turn the ignition on, but do not start the engine. Select “ OK ” if you need to clear the message. Use the “ Right ” arrow button to go over to the Gear icon on the far right side.
How to reset the engine oil light due now?
From the “ Maintenance ” screen, use the arrow buttons to toggle the selection to “ Service “, then press the “ Enter ” button to enter that screen. From the “ Service ” screen, use the arrow buttons to toggle the selection to “ Reset “. Press “ Enter ” to reset the engine oil light.
How to turn off the service engine soon light?
The only way that you are going to be able to turn off the service engine soon light is to return your Nissan Altima to normal working order. There are no shortcuts. But, it may be worth taking a look at the gas cap.