How do you change the clutch on a CB750?

It require much less oil than using a large bowl or whatnot. First off,to get to the clutch just lean the bike over on the kickstand and remove the covers. No need to drain the oil to do this. You won’t lose any at all.

How much oil does a Honda Nighthawk take?

Engine Oil Capacity at draining 2.8 U. S. quarts (2.7 liters) Recommended Oil for various temperature ranges: Engine Oil Capacity with filter change 3.1 U. S. quarts (3.0 liters) 32 ° F to >115 ° F SAE 20W-50 Oil pressure @ 176 ° F 90 psi @ 6,000 rpm 32 ° F to >110 °F SAE 20W-40 Recommended Oil Honda 4-stroke oil or equivalent.

How big is the exhaust valve on a Honda Nighthawk?

Intake valve closes 35 ° ABDC Engine weight 179.2 lb. Exhaust valve opens 30 ° BBDC Firing order 1-2-4-3 Exhaust valve closes

How tall is the ground clearance on a Honda Nighthawk?

Wheel base 59.3 in. Overall width 31.5 in. Ground clearance 5.5 in. Overall height 44.7 in. Dry weight 463 lb. Seat height 30.7 in. Curb weight 498 lb. Footpeg height 12.6 in. Max weight capacity 364 lb.

How to change and adjust a CB750 SOHC clutch?

Go ahead and break all four of them loose,then proceed to back them out 1/2 turn at a time until the lifter plate becomes slack. The plate will become completely slack before the bolts are all the way removed,so need to worry about anything flying out under tension. Remove the lifter plate and the clutch springs.

Intake valve closes 35 ° ABDC Engine weight 179.2 lb. Exhaust valve opens 30 ° BBDC Firing order 1-2-4-3 Exhaust valve closes

Navigation