Is Herculiner a good product?
5.0 out of 5 stars Excellent Bed Liner! I am really impressed with this bed liner kit. It is simple and easy to apply. Kit comes with the 1 gallon can of bed liner, two foam roller applicators, roller and handle, 2″ paintbrush, and scouring pad to prep the bed surfaces.
Can Herculiner be removed?
Unlike conventional bed liners that are slipped into place, Herculiner is a spray-on application (similar to Line-X and Rhino Liner). There are several different ways to remove Herculiner, from peeling or grinding it off by hand to using chemicals like brake fluid, paint thinner or mineral spirits.
How many coats of Herculiner should I put on?
Q: How thick should it be applied? A: First coat forms a good base. After 1 hour to 1 ½ hours to dry; then apply a second coat that will cover any open pores. One (1) gallon covers 6′ beds with 2 coats; an extra quart is needed for 8′ beds.
How do I get Herculiner off my hands?
Apply xylene or acetone to the Herculiner on your skin and rub it off using shop rags. This should be done as soon as your find the bed liner on your body, but it will help to break down the material if it has been left to set for a few minutes.
Is Herculiner toxic?
Acute toxicity (inhalation:dust,mist) Category 4 H332 Harmful if inhaled. Respiratory sensitisation, Category 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Can you paint over Herculiner?
We do not recommend painting over the Herculiner as the paint will most likely crack, spiderweb and start to peel off. Also, the surface will no longer be a slip resistant surface. If you want a smoother surface, you may strain some of the rubber granules out of the Herculiner.
How long does it take Herculiner to fully cure?
A: You should allow Herculiner to dry about 9-12 hours before any light use and allow 24 hours for a complete cure. Curing begins when Herculiner is exposed to atmospheric moisture. Therefore, with higher humidity, curing time is shorter.
What kind of surfaces can herculiner be applied to?
And it isn’t just for truck beds. Herculiner can be applied to concrete, plastic, rubber, metal, wood, or fiberglass – just about anywhere where a skid-resistant surface is needed!
Which is better herculiner spray or aerosol liner?
The roll on Herculiner has quite a bit more texture than the spray can but the color fades VERY quickly. I ended up covering each area with the roll on Herculiner and then, after that dried, i topped it off with the aerosol can Herculiner. The aerosol can has a much more brilliant black color and little to no texture.
What kind of coating is on herculiner bed liner?
It has polyurethane and rubber granule coating that is applied in just 3 easy steps to the bed surface using the rollers and brush included with the kit. When cured, it provides a durable skid-resistant protective coating.
When to apply a second coat of herculiner?
(HERCULINER is not a paint,and should be laid ontothe surface,in one direction,not brushed out as an oil or latex paint.) Between coats,clean brush only with recommended thinner/cleaner Xylene (Xylol). The second coat can be applied as soon as the first coat is touch dry (usually within 1-4 hours – slightly longer for red and gray HERCU- LINER.)