What oil does a 99 accord take?

What oil does a 99 accord take?

5W-30 oil
Pour 5 quarts of 5W-30 oil into the funnel. Make sure to use 5W-30 oil. Though using slightly different grades will work, it is best to use the type stated in your owner’s manual.

What type of oil does Honda Accord take?

According to the 2020 Honda Accord Owner’s Manual, you should be using Genuine Honda Motor Oil – specifically premium-grade 0W-20 detergent oil with an API Certification Seal on the container.

What kind of oil do you put in a Honda Accord?

Pour 5 quarts of 5W-30 oil into the funnel. Make sure to use 5W-30 oil. Though using slightly different grades will work, it is best to use the type stated in your owner’s manual. Screw the oil filler cap back in place.

Where is the oil filter on a Honda Accord?

The engine oil filter is located on the back of the engine, almost directly above the drain plug. Move the oil drain pan so that it is underneath the oil filter. Unscrew the oil filter by turning it counterclockwise until it comes free of the threads on the engine.

What kind of motor oil does a Honda Acura use?

If you have a Honda or Acura that calls for 5w20, then only use 5w20 motor oil. It doesn’t matter what your hot-rodder buddy says about 5w20 being too thin. He isn’t a Honda Engineer.

Where to put the oil change Jack on a Honda Accord?

Place a jack on the round portion of the front subframe on the driver side of the car, just inside the wheel and just outside of the front sway bar bushing. Raise the car until you have enough room to work comfortably underneath it.

Pour 5 quarts of 5W-30 oil into the funnel. Make sure to use 5W-30 oil. Though using slightly different grades will work, it is best to use the type stated in your owner’s manual. Screw the oil filler cap back in place.

The engine oil filter is located on the back of the engine, almost directly above the drain plug. Move the oil drain pan so that it is underneath the oil filter. Unscrew the oil filter by turning it counterclockwise until it comes free of the threads on the engine.

Place a jack on the round portion of the front subframe on the driver side of the car, just inside the wheel and just outside of the front sway bar bushing. Raise the car until you have enough room to work comfortably underneath it.

What to do if your Honda Accord has metal flakes in it?

Metal flakes in your oil could indicate a serious problem inside your engine. While the oil is draining, wipe down the drain plug with a clean rag or towel and remove the drain plug gasket. Replace the drain plug gasket with a new one, making sure that the new gasket fits over the threads and sits against the head of the bolt.

Posted In Q&A