What does a myRIO do?
MyRIO is a real-time embedded evaluation board made by National Instruments. It is used to develop applications that utilize its onboard FPGA and microprocessor.
What is the ADC resolution range for myRIO?
12
(ADC Resolution = 12.) The NI myRIO-1950 has 3.3 V general-purpose DIO lines on the MXP connectors.
How many digital I O does myRIO have?
12 digital input channels
Adds a new digital input channel to the channel list. You can add up to 12 digital input channels. (myRIO Toolkit) If you use the myRIO high-throughput FPGA personality, this option is available only when you specify Digital input (1 sample) for I/O mode.
What is the use of accelerometer in NI myRIO?
Your accelerometer produces 3 signals: X-axis, Y-axis, and Z-axis acceleration data. These signals can be used to compute the roll and pitch of your myRIO board.
How do I connect myRIO to WiFi?
Before you can configure the settings of the wireless network on the myRIO, you must connect the myRIO to the host computer over USB. To learn about configuring the wireless network on the myRIO, launch LabVIEW, click the Set Up and Explore link, and select Configure WiFi.
What is a myRIO microcontroller?
National Instrument’s myRIO is a unique microcontroller that combines the flexibility of an ARM processor with the speed of a Field Programmable Gate Array (FPGA). The all-in-one package includes both analog and digital interfaces, with bipolar analog I/O, making it an ideal device for high-speed control.
How do I connect myRIO to Labview?
ni.com/learn-myrio Restart your computer when prompted. Connect power to the myRIO device, then connect the USB cable from the myRIO device to the computer. Allow 20 to 30 seconds for the computer to recognize the myRIO device. Launch the Getting Started Wizard and follow the prompts to install software on the device.
What is mean by MXP port in myRIO?
myRIO Expansion Port
The NI myRIO-1900 has analog output channels on myRIO Expansion Port (MXP) connectors A and B, Mini System Port (MSP) connector C, and a stereo audio output connector. MXP connectors A and B have two analog output channels per connector, AO0 and AO1, which you can use to generate 0-5 V signals.
How do I reset my NI myRIO?
Start NI-MAX. Right-click “Remote Systems” and select “Troubleshoot Remote Systems” ….In the next dialog, select myRIO and your myRIO model.
- Wait for automatic check of the required software package and click “Next”.
- Wait for the firewall check to complete and click “Next”.
- Wait for the device scan to complete.
How do I connect myRIO to LabVIEW?
How do I connect myRIO to my laptop?
You can connect the myRIO to a host computer by using one of the following methods: USB device connection—When you use a USB cable to connect the myRIO from the USB device port to a host computer, the LabVIEW myRIO Toolkit installs a USB driver on the host computer.
How do I connect myRIO to my computer?
What kind of input does the NI myrio-1950 have?
The NI myRIO-1950 provides analog input (AI), analog output (AO), digital input and output (DIO), and power output in a compact embedded device. The NI myRIO-1950 connects to a host computer over USB.
What kind of processor does myrio student use?
It includes analog inputs, analog outputs, digital I/O lines, LEDs, a push button, an onboard accelerometer, a Xilinx FPGA, and a dual‐core ARM Cortex‐A9 processor. Some models also include WiFi support. You can program the myRIO Student Embedded Device with LabVIEW or C.
What are the connectors for Ni myrio LEDs?
The discrete LED interface circuit requires two connections to NI myRIO MXP Connector B (see Figure A.1 on page233): 1. Anode!B/+3.3V(pin33) 2.
What kind of port does the myrio 1900 have?
The NI myRIO-1900 has analog i nput channels on myRIO Expans ion Port (MXP) connectors A and B, Mini System Port (MSP) connector C, and a stereo audio input connector. The analog inputs are multiplexed to a single analog-to-digital converter (ADC) that samples all channels.