Where does the red wire go on a bathroom fan?
Normally, red is used for switched power. So, you’d cap off the black from the x/3 cable (that goes up to the fixture), and use the red to provide power to it through the switch.
Can bathroom exhaust fan be on same circuit as lights?
In general, residential exhaust fans require very little power and combining with lights should not be a problem. This is acceptable. Many bathroom fans include lights with the intention of both being wired to one switch on the same circuit. They can also be wired separately to different switches.
Do I need a fused spur for an extractor fan?
The fan also requires a local means of switching off for mechanical maintenance (537.3. 2.5) and, therefore, a standard switch fused spur should suffice, unless there is a permanent live also required; in which case the switch will need to be double-pole.
Can I wiring extractor fan to shower switch?
In short no, it is not permitted under BS7671:2008 (17th edition wiring regulations) to take a spur off of the 10mm shower circuit to feed the fan. I think you would be best advised to get a part P registered electrician in to do this job if you want it to be fully compliant with BS7671:2008.
How do you wire a bathroom light and fan to one switch?
Mount the fan and light and move to the switch box. Connect the black wire from the fan to the bottom terminal of the switch and the live circuit wire to the top terminal. Splice the white wires together and cap them. Twist the ground wires together and connect them to the green ground screw on the switch.
Does a bathroom fan have to be on its own circuit?
Bathroom Circuits A basic wiring plan for a bathroom includes a 20-amp, GFCI-protected circuit for the receptacles and a 15-amp general lighting circuit for the switches, light fixtures, and vent fan. If the vent fan has a built-in heater, it must have its own 20-amp circuit.
What kind of ventilation fan does utilitech use?
The round Utilitech ventilation fan with easy installation housing combines an integrated LED light with a quiet, powerful fan. The easy fit housing holds an energy efficient DC brushless motor capable of continuously running for 70,000 hours.
How to wire an exhaust fan with heater and light?
Wiring a new exhaust fan with a heater and a light requires an understanding of how the electrical circuits control the fan, heater, and light. The first step is to look at the old exhaust fan wiring Look at the way your old exhaust fan. You need to look at the switches in the bathroom and the wires attached to the old fan unit.
Where is the best place to put a ventilation fan?
You can keep humidity down by installing a ventilation fan. To be effective, the fan should be more or less centered in the ceiling, which is also a good place for a light, so many fans come with a light fixture.