What to do if your airbag sensor is not working?
It may self-correct once the battery is fully charged again, if not, you may have to perform a sensor reset. If you’ve recently driven through floodwaters, or accidently left the window open in the rain, chances are the airbag module that sits under the driver’s or passenger’s seat got wet.
Where are the airbag sensors located in a car?
There are two main types of airbag sensors in modern vehicles. Mass sensor systems are typically located in the front of the vehicle and measure impact. Usually there will be one sensor inside the engine and another somewhere in the passenger seating area.
What makes the airbag warning light turn on?
Naturally, these can become faulty, which would cause the airbag light to illuminate. The two most common kinds of airbag warning lights are the letters ‘SRS’, or an image of a man with a seatbelt on and a deployed airbag in front of him. Typically, these are either yellow or red, and stay illuminated.
Is it okay to drive with airbag light on?
SRS stands for Supplemental Restraint System, as is the official term for your vehicle’s airbag system. Though it is usually okay to drive with this light on, it isn’t recommended.
What to do if your airbag sensor says there is a problem?
If the airbag sensor’s wirings and connector are fine and the airbag control module says there is a problem with the airbag sensor, replace it! They often not super expensive, and you do not want to mess around with these parts because you really want it to work if the accident occurs!
Where is the negative terminal on the airbag sensor?
Open the hood of your car and locate the battery. On the battery, you will see a positive and a negative terminal. Using a socket wrench, unscrew the nut on the negative terminal and remove the cable clamp completely. After the clamp is removed, wait for at least five seconds then reconnect the negative terminal.
What causes the airbag clock spring to wear out?
The airbag clock spring maintains the consistency between the airbag and the electrical wiring by continually interweaving in and out against the steering wheel. The circuit bands may begin to wear out after some time and can cause the airbag system to register a code error. This will, in turn, cause the airbag light to flash in the dashboard.
It may self-correct once the battery is fully charged again, if not, you may have to perform a sensor reset. If you’ve recently driven through floodwaters, or accidently left the window open in the rain, chances are the airbag module that sits under the driver’s or passenger’s seat got wet.
There are two main types of airbag sensors in modern vehicles. Mass sensor systems are typically located in the front of the vehicle and measure impact. Usually there will be one sensor inside the engine and another somewhere in the passenger seating area.
Why does my airbag light keep coming on?
Faulty airbag sensors are probably the most common cause of airbag lights coming on. Your vehicle has a number of different sensors which are designed to activate the airbag system in the event of an accident. Naturally, these can become faulty, which would cause the airbag light to illuminate.
SRS stands for Supplemental Restraint System, as is the official term for your vehicle’s airbag system. Though it is usually okay to drive with this light on, it isn’t recommended.