What is pipe puddle flange?
Flexseal Puddle Flanges ensure a watertight and pressure-tight seal where pipes pass through concrete walls of any structure or building. Installed on pipes during construction where water penetration has to be prevented.
What are puddle flange used for?
Flexseal Puddle Flanges ensure a watertight and pressure-tight seal where pipes pass through concrete walls of any structure or building. When a pipe is required to pass through a wall or concrete structure it is usually cast at the point of construction.
Do you need a puddle flange?
The puddle flange is the interface or joining method between the waterproofing and the drain. You always need it. Technically if you could waterproof all the way into the drain pipe you wouldn’t need the puddle flange but in practice that is impossible to achieve without leaving small openings that water will get into.
What is a puddle flange Adaptor?
The Kinetic range of Puddle Flange products are installed on drainage pipes to assist with draining away any water that leaks into screed due to waterproofing failure of the grout or tiled surface above, eliminating the saturation and rotting of timber floor or concrete slab below.
What is the size of a puddle flange?
Puddle Flanges. (32 – 1300mm diameter) Ensures a watertight seal where pipes pass through the walls of any structure below groundwater level. Flexseal Puddle Flanges are used to seal around the outside of pipes that are required to pass through concrete structures.
Who is the manufacturer of HDPE puddle flange pipes?
HDPE Puddle Flange | HDPE Pipes & Fittings Manufacturer,Exporter,Supplier and dealer In Ahmedabad, India, Gujarat-ASVA Corporation
How do you install a puddle flange on a ytmpipe?
Thanks to the easy-lock tension bands, installing a YTMPipe puddle flange takes only a few minutes. The puddle flange is mounted by hand on the pipe and secured with the supplied tension bands. A screwdriver or 6mm nut driver can be used to install the tension band on pipes of up to 315 mm in diameter. For larger pipes, use a clamping tool.
When do you need a fernco puddle flange?
The Fernco Puddle Flange is designed to prevent leaks around pipelines penetrating poured concrete walls, floors, shafts, tanks, pools, manholes, and structures. The flexible gasket is installed during construction on the outside diameter of the pipe where a water tight seal is required.