How do I log into WAP54G?
Open a web browser such as Internet Explorer® and enter the default IP Address of your access point and press [Enter]. NOTE: In this example, we used the default IP Address of the WAP54G. NOTE: If the IP Address of the access point has been changed, enter the new IP Address instead.
How do I log into my Linksys access point?
Open a web browser, type 192.168. 1.252 in the Address bar and press [Enter]. Step 4: On the authentication window that will appear, enter the default username and password “admin” in both the Username and Password fields then click Log in.
What is the default IP of Linksys WAP54G?
192.168.1.245
The default IP address of a WAP54G is 192.168. 1.245 and the Configuration Type is Static IP.
How do I log into my access point?
Open the web browser and type the IP address of the access point/extender (Default is 192.168. 1.1/192.168. 1.254/192.168. 0.254) into the address bar and then Press Enter.
How do I reset my WAP54G?
How to Reset a WAP54G Password
- Take a small paperclip and bend one end of it so that it’s straight.
- Locate the reset button on the back of the router.
- Release the button and wait until the lights stop blinking while the access point resets itself.
How do I reset my Linksys WAP54G access point?
If the access point doesn’t reset, hold the reset button in for 20 seconds, keep the button depressed and unplug the access point for 20 seconds, and then plug in the access point and release the button.
What is the username for Linksys router?
admin
The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button.
How do I change the password on my Linksys WAP54G router?
There is no default username for the access point, only a default password of “admin.” If the access point doesn’t reset, hold the reset button in for 20 seconds, keep the button depressed and unplug the access point for 20 seconds, and then plug in the access point and release the button.
How do I find the IP address of my Linksys wireless access point?
Note the IP address of the “Default Gateway” entry listed on the sixth line below the “Ethernet adapter” header in the command line output. The “Default Gateway” IP address is the IP address of the Linksys access point.
How do I set up my Linksys wap54g?
Open a web browser like Internet Explorer. On the Address bar, enter the IP address of the WAP54G then press [Enter]. NOTE: The default IP address is 192.168.1.245. A new window will prompt for a User name and Password . Enter the User name and password of the WAP54G then click OK.
What’s the default password for a Linksys access point?
For wireless products such as access points, routers, and gateways, you will be asked for a password when you want to change their settings. These devices have a default password set by the factory. The Linksys default password is admin.
How to reset Cisco SSID and WPA-Personal key?
If the association is unsuccessful, then the Cisco logo will stop flashing and stay orange. To clear the SSID and WPA-Personal key, press and hold down the Cisco logo for ten seconds. The Cisco logo will turn orange to indicate a successful reset.