How many pins does an OBD II connector have?
The connector may have other pins populated that are unimportant. The OBD II connector has 16 pin locations which are numbered as shown below. Vehicle OBD II Connector (front view) CAN Protocol Pins. If pins 5, 6, 14 and 16 are populated, the vehicle supports CAN.
When did the OBD II data link connector come out?
The DLC or Data Link Connector is an OBD II, 16 pin, standard connector used in all automobiles manufactured since 1996. In today’s vehicles, it’s in constant communication with the CAN, or Computer Area Network.
Where is the OBD plug on a Honda CRV?
OBD connector location for Honda CR-V (2002 – 2006) You will find below several pictures which will help you find your OBD connector in your car. The OBD II socket is located under the steering wheel on the right
Is the J1962 an OBD 2 compliant connector?
2) There will be a note on a sticker or nameplate under the hood: “OBD II compliant”. The SAE J1962 specification provides for two standardized hardware interfaces, called type A and type B. Both are female, 16-pin (2×8), D-shaped connectors, and both have a groove between the two rows of pins.
What are the pinouts for the Audi OBD-2 diagnostic connector?
The pinouts for the 16 pin J1962 OBD-2 car diagnostic connector are: Audi OBD-II diagnostic interface pinout and wiring. BMW 20 pin to OBD adapter pinout and wiring.
Where is my OBD2 port in Honda Civic?
The norm states that the port must be located inside the vehicle passenger compartment. Depending on the make and model, it may or may not be easy to locate. To diagnose your vehicle yourself, download our EOBD-Facile car diagnostic software. Use our search engine below to locate your OBD2 port! Civic 10 (2016 – …) NC700 (2012 – …)
When does a car need an OBD 2 connector?
All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995. Where is the OBD-2 connector located?
2) There will be a note on a sticker or nameplate under the hood: “OBD II compliant”. The SAE J1962 specification provides for two standardized hardware interfaces, called type A and type B. Both are female, 16-pin (2×8), D-shaped connectors, and both have a groove between the two rows of pins.
How many pins are in a car diagnostic connector?
Go to 4 pins | 6 pins | 8 pins | 9 pins | 10 pins | 12 pins | 14 pins | 16 pins | 17 pins | 20 pins | 23 pins | 30 pins | 37 pins | 38 pins | connectors
What are the pin numbers for General Motors?
General Motors (GM) OBD II diagnostic interface pinout Pin Number Pin Name Description 1 SW-LS-CAN (33kB) or DW-FT-CAN (+) (<125k 2 J1850 n/a 3 MS-CAN (+) (95kB) 4 GND Chassis ground
What kind of diagnostic pinout does a GM car use?
Most GM cars produced in 1996-2003 use J1850-VPW interface. GM cars produced in 2003-2006 use J1850-VPW interface or CAN. Most cars produced after 2006 are equipped with CAN bus. Since 2002, there is another pinout – GM-LAN (for vehicles equipped with CAN bus)
How many pins does the OBD1 connector have?
The connector is often black and has 12 pins on it; pretty easy to identify. The OBD1 connector has 12 pins, but not all are used on all cars. The standard pins like the ground, power and a diagnostic pin are the same from a lot of different car manufacturers.
Where is the 16-pin diagnostic connector ( DLC )?
The EOBD / OBDII 16-pin diagnostic connector (DLC) Where is the connector? The EOBD connector is required by the Directive to be located within the passenger compartment of the car, within reach of the driver’s seat. Tools should not be required to reveal the connector, but it may have a removeable cover over it.
Most GM cars produced in 1996-2003 use J1850-VPW interface. GM cars produced in 2003-2006 use J1850-VPW interface or CAN. Most cars produced after 2006 are equipped with CAN bus. Since 2002, there is another pinout – GM-LAN (for vehicles equipped with CAN bus)