How much does it cost to change brake pads on a GMC Sierra?
I recently changed my rear brake Pads on my 2001 GMC Sierra. The mechanic at the oil change station suggested that I install new 2 Rotor’s, and 2 new Calipers, along with the Pads. He said 90% of the time, the calipers stick on these trucks after the pads are changed. He wanted to charge me $532.00.
Why are the brake pads on my Silverado not working?
I just replaced all of the brake pads on my 2003 Silverado extended cab 5.3L V8 4WD, and afterward I noticed that I could smell the right rear brakes cooking. Upon further inspection I found that the calipers are not releasing the rotor, the problem is present on both sides of the rear brakes, but more prevalent on the passenger side.
How to replace rear brake pads and rotors?
Step 5 – Using a pair of dikes remove the rotor retainer clip which is used in initial assembly and will not be reinstalled. Step 6 – Next, use a socket to remove both upper and lower caliper mounting bolts. Use a wrench if necessary to secure the slide.
Why are my rear brake rotors not releasing?
Upon further inspection I found that the calipers are not releasing the rotor, the problem is present on both sides of the rear brakes, but more prevalent on the passenger side. When the caliper is squeezed using a c-clamp, and the bleed screw is opened I am able to rotate the rotor/wheel hub w/o any problem so it is not a wheel bearing.
I recently changed my rear brake Pads on my 2001 GMC Sierra. The mechanic at the oil change station suggested that I install new 2 Rotor’s, and 2 new Calipers, along with the Pads. He said 90% of the time, the calipers stick on these trucks after the pads are changed. He wanted to charge me $532.00.
I just replaced all of the brake pads on my 2003 Silverado extended cab 5.3L V8 4WD, and afterward I noticed that I could smell the right rear brakes cooking. Upon further inspection I found that the calipers are not releasing the rotor, the problem is present on both sides of the rear brakes, but more prevalent on the passenger side.
Upon further inspection I found that the calipers are not releasing the rotor, the problem is present on both sides of the rear brakes, but more prevalent on the passenger side. When the caliper is squeezed using a c-clamp, and the bleed screw is opened I am able to rotate the rotor/wheel hub w/o any problem so it is not a wheel bearing.
What causes a brake caliper to not release?
A brake hose that is deteriorating on the inside can cause a caliper to not release too.
What happens when you change rear brake pads?
The aluminum housing corrodes internally and when you press the piston back in it will stick almost everytime. Replacing the brake fluid yearly helps this problem but it does not guarantee it won’t happen again next time you change pads.