How do you fix an E11 error on a washing machine?
Resolution
- Check the water supply to ensure that the water pressure is proper.
- Clean the filter in the inlet hose next to the tap.
- Clean the filter in the inlet hose next to the tap.
- Ensure the correct position of the drain hose.
- Ensure correct drain height.
- Clean the pump and filter.
- Check for blocked drain.
What does E11 error mean?
The code means the washer took too long to fill. It could be one of three problems, either the machine isn’t filling with water, or won’t fill with enough water or it has a draining issue.
How do you reset an E11 Electrolux washer?
Reset the appliance. Remove the plug from the socket, wait 30 seconds and then plug it in again.
How do I reset my Hoover washing machine?
To reset the washing machine:
- Press POWER to turn off the washing machine.
- Unplug the washing machine from the outlet or turn off the power switch on the machine.
- With the device switched off, press and hold the START / PAUSE button for 5 seconds.
- Reconnect the washing machine or turn it back on.
What does E11 mean on Electrolux washing machine?
This E11 error means that the washing machine did not fill with water fast enough and it took more than 6 minutes to fill with water, which could certainly be due to the water not being filled. The good news is, it’s easy to fix this problem.
What does E11 mean on a Bosch washing machine?
If the e11 error code appears on the display of the Bosch washing machine, check the following points: The tap of the water supply to the washing machine is blocked. Low water pressure in the water supply. The filter in the hose of the washing machine is clogged.
What does E11 mean on Bosch dishwasher?
The thermistor monitors the water temperature inside the dishwasher and allows the control board to regulate the heating element. If the sensor fails and its resistance is outside the normal limits, the control board will register this and show the E11 error code.
How do I turn off the child lock on my Electrolux washing machine?
To activate/deactivate this option, touch the Stains/Prewash (10) and the Extra Rinse (7) buttons simultaneously in a fast and consistent manner until the padlock no longer displays on the LED display.
How do you put an Electrolux washer in diagnostic mode?
Electrolux Diagnostic Mode * Press the Cancel button to enter standby mode and enable diagnostic entry. * Within 10 seconds after pressing Cancel , press any button to wake up the control. button under the display simultaneously for 3 seconds to enter the diagnostic mode.
How do you reset a digital washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
How do I unlock my Electrolux washing machine?
On some machines, the door can be opened in an emergency by pulling down on a bar using a screwdriver or similar object, for example. If the machine has an emergency release, it is located next to the fluff filter. See the full description in the user manual. Download user manual.
What does E11 mean on a Hoover dryer?
An E11 error on a Hoover or Candy washer dryer is indicating a problem with the thermistor or wiring. This video shows how to fix both and return your washer…
Why does my washer have an E11 error code?
If your washer dryer is showing an E11 error code or the power light blinks eleven times before pausing and repeating there is likely to be a problem with the dryer sensor or its wiring. You may feel like you’re doomed but fear not as we have all the knowledge that can help you restore your appliance back to its best.
Where is the sensor on a Hoover washer dryer?
To access the dryer sensor take off the upper lid by removing the screws. Depending on the model, locate the washer dryer sensor within the ducting area. Occasionally the electrical wires leading to the sensor may be damaged due to being worn or excess tension. Check the dryer sensor resistance using a multimeter.
Why does my Hoover dryer not dry my clothes?
An E11 error code on a Hoover washing machine will indicate that you have a fault with the drying sensor. If the drying sensor is damaged or faulty then you will find yourself with a washer dryer with won’t dry your clothes after they have been washed. So unless you are doing some light reading – you’re currently faced with a E11 error code.