What should the torque be on an accord ATF?
4. Once the ATF is drained, wipe the ATF drain bolt with a clean rag, refit and torque to 49Nm. 5. Initial Refill: Haynes manual recommends you start your refill by pouring in 1/3 rd of what you drained through the dipstick hole (However, I feel this is not practicable for two reasons: a. your drain pan may not be calibrated.
How many quarts does a V6 Honda Accord have?
Capacity for V6 models is 3.1 quarts), support stands, funnel, and hand protection. 1. After driving the car to operating temperature, park on level ground and jack up the right front end and support on stands (never work under a vehicle supported by a jack only.
When to change ATF level on Honda Accord?
I recommend driving about 10 miles. Hot ATF will better remove any deposits or sludge. Also remember that on this model, ATF level is checked on a hot non-running vehicle. A word of warning, especially for those of us in Nigeria; Honda automatic transmissions are quite selective of ATF’s so don’t go pouring ABRO, Seahorse etc. down there.
What kind of wrench do I need for Honda Accord?
If you do, you may be booking a transmission job! Materials: 3/8 square wrench (a 3/8 th ratchet or breaker bar will do), drain pan, Honda ATF DW-1 (for 4cyl models: 3quarts, got 4 quarts just to be safe, but still ended up using 3 anyway. Capacity for V6 models is 3.1 quarts), support stands, funnel, and hand protection.
What kind of engine does a Honda Accord have?
5) in 2005, the model with 4-door sedan body and V-6 2997 cm3 / 183.6 cui engine size, 159.5 kW / 217 PS / 214 hp (SAE net) of power, 288 Nm / 212 lb-ft of torque, 5-speed automatic powertrain for Asia .
What’s the top speed of a Honda Accord?
Specifications listing with the outside and inside dimensions, fuel economy, top speed, performance factory data and ProfessCars™ estimation: this Honda would accelerate 0-60 mph in 7.3 sec, 0-100 km/h in 7.7 sec, 0-200 km/h in 37.6 sec and quarter mile time is 15.7 sec.
How does forced induction increase horsepower and torque?
Forced induction systems, like superchargers or turbochargers, compress the air flowing into your engine and offer the greatest potential performance increase. It’s not uncommon to increase horsepower and torque by over 50% with the help of forced induction.
What’s the best way to increase horsepower and torque?
It’s not uncommon to increase horsepower and torque by over 50% with the help of forced induction. Seriously. The more an engine has, the more fuel it can mix in. A charged engine produces more power overall, which significantly improves acceleration.