How much fluid does a 4L60E transmission take?
The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid,
What kind of transmission does a Chevy Tahoe use?
The 4L60-E is found in nearly every GM rear-wheel-drive application, including the C/K Truck, Sonoma, Jimmy, Tahoe, Yukon, Astro, Safari, Suburban, Bravada, Firebird, Camaro and Corvette Before the Late 4L60-E transmission, there was the Turbo 700R, which was introduced in 1982.
What to do if you have a fluid problem in your transmission?
It is possible to remedy a fluid problem by removing the checkball from its cage in the case in the rear of the transmission may help (must remove valve body), or adding a high-viscosity additive or other seal restorer product. May also have worn boost valve (can replace in the pan).
Why does my transmission make a whining noise?
Frequently, a low, growling type noise may appear because of low transmission fluid level. The sound may turn into a whining sound when gears’ teeth wear accelerate because of a lack of proper lubrication, contamination or high mileage. Driving with low or contaminated transmission fluid, will cause all kinds of transmission trouble later on.
How to repair a 1988 GM Truck wiring diagram?
Access our GM Full-Size Trucks 1988-1998 Wiring Diagrams Repair Guide by creating an account or signing into your AutoZone Rewards account. Once you sign in, follow these instructions to access our Repair Guides. Add your vehicle in Manage My Vehicles. Enter your vehicle details.
How to identify Chevrolet GMC manual transmissions [ video ]?
After locating correct unit a link is supplied to provide detailed information on specific kit and parts that are available for your unit. Information is provided for General Motors 3 speed, 4 speed , 5 speed and 6 speeds manual transmissions. Cast iron case and extension housing with 4-bolt side cover.
What are the case numbers for a GMC manual transmission?
Case casting is number 13-53. All aluminum top-loaded transmission with shifter on top of the extension housing with internal single-rail shift linkage. Front and rear main bearings are tapered. The cluster gear is solid and is supported on each end by cylindrical roller bearings located in the case. Case castings numbers are 13-51 or 13-52.
Is there Trans fluid flush for GM 8 speed transmissions?
Customers that complain of shuddering and harsh shifting characteristics in the 8-speed GM transmissions are recommended for a trans fluid flush. As of August 7 th, GM dealers should also be flushing all potentially affected new vehicles on the lot.
Why is my transmission fluid heating up in my truck?
Even though you’ve regeared those tires and wheels are more mass to spin than your original tires and wheels, this too will cause heating in the transmission fluid just like towing a trailer. As the trans gets older you may be seeing this problem due to a combination of the different items you mentioned.
When did the Chevy 4L80E transmission come out?
Unlike the later 4L60E transmission, the 4L80E did not feature a removable bellhousing, but an integrated bellhousing with only the Chevrolet 90 degree engine bolt pattern being available. In 1991 the 4L80E was rolled out in GM trucks, including the Sierra, Silverado, Suburban, etc. as well as the Hummer H1.
The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid,
What is the RPO code for a GM 4L80 transmission?
The 4L80 nomenclature denotes that the transmission is a 4-Speed, Longitudinally mounted, and for 8000 lbs. vehicle weights. It’s RPO code is “MT1” and has been domestically manufactured in GM’s Ypsilanti and Willow Run plants.
What kind of torque converter does GM 4L80 have?
The torque converter is a fluid turbine drive and like those on its predecessor transmissions; the TH350C, 700R4, and 4L60, the 4L80 features a lock-up pressure plate for direct mechanically coupled driving from the engine crank. The 4L80 features a 310 mm torque converter. As to length, this transmission is 26-1/4″ long.