How do I know which condensate pump to buy?
Select a pump with a maximum lift rating that is suitable for your application. Check your equipment service manual to determine the condensate output and choose a pump with sufficient capacity. As a general rule, the output flow of the pump should be at least double the input rate from the appliance.
Do I need a condensate return pump?
If the outlet pressure here can be greater than the inlet pressure, then you need a condensate pump system. That is pressurized system. But the thing about any system is that we want to return the condensate as hot as possible.
What is the quietest condensate pump?
What is the quietest condensate pump? The quietest condensate pump is a barometric leg. A barometric leg is a pipe leading from a condenser to beneath a free surface 10.4 m below the liquid water level in the condenser.
What is a condensate return pump?
The purpose of a condensate return unit or condensate return pump is to lift the condensate to overhead mains in order to get the water back to the boiler room and the boiler feed pumping unit as fast as possible. The receiver is typically made from cast iron or steel.
How far will a condensate pump push water?
Most pumps push water up to 15 feet vertically or horizontally.
How reliable are condensate pumps?
Considerations. These pumps are very reliable, but they require periodic maintenance to prevent premature failure. A condensate pump that operates incorrectly can overflow and cause significant water damage. The excess moisture can lead to unhealthy mold and mildew growth inside your home.
What does a condensate return unit do?
Condensate return units are designed to collect the returns and move the condensate along quickly and efficiently, minimizing heat loss and thus the energy required to heat it back to steam.
How does a condensate return system work?
In a pumped condensate return system, the flashing condensate is discharged into a vented tank, from which the flash steam is removed. The condensate must be pumped from the vented tank to the collecting tank, and then pumped from the collecting tank to the boiler.
How loud are condensate pumps?
Condensate pumps are often very loud due to high fluid velocity and hydraulic action. Depending on the size, location and noise level of the pump, steps taken to reduce noise may include altering the insulation between building floors, reducing flow velocity or providing rubber buffers.
Can I put bleach in my condensate pump?
Put a funnel in the “T” and pour a quart or two of bleach into the drain. Go slowly as to allow the bleach to kill the mold and mildew . This should be done once a year at least. If you have a condensate pump, the bleach will fill up the water reservoir and turn on the pump cleaning out the vinyl exit tubing.
How big is a Hoffman condensate pump receiver?
The Hoffman condensate pump units feature cast iron receivers that are warranted for 20 years from date of shipment against failure due to corrosion. They are supplied in 6, 9, 14 and 23 gallon receiver sizes with low inlet heights for ease of installation.
What kind of condensate pump does Hoffman watchman use?
160036 – Hoffman Watchman WCD30-30B-MA Condensate Unit. are close coupled, vertical design pump internals can be fully serviced without disturbing the equipped with enclosed bronze impellers, renewable bronze wear rings, stainless steel… 620PF-C35 Domestic Centriflo Pump Only 3 HP.
Which is the best domestic condensate handling pump?
620PF-C35 Domestic Centriflo Pump Only 3 HP. These pumps are the heart of Domestic Pump condensate-handling equipment. Centriflo centrifugal pumps are basic components of much of our line of condensate-handling equipment. Designed for the rigorous…