How often should I change my car filters?
every 12,000 to 15,000 miles
Replacement Time Check your owner’s manual; it should tell you when your air filter should be replaced. This is generally every 12,000 to 15,000 miles, depending on your vehicle. If you have driven more than that since the last time you replaced the air filter, it’s probably time to get it changed.
How do you change the fuel line in a Honda Accord?
Screw the bottom fuel line into the bottom of the fuel filter. Tighten the fuel line nut with the 14mm open end wrench. Screw the top banjo bolt into the top of the fuel filter. Tighten the banjo bolt with the 17mm open end wrench. Slide the catch pan out from under the Accord.
How often should you change the fuel filter in a Honda Accord?
The fuel filter in a Honda Accord should be changed every 30,000 to 50,000 miles. Park the Honda Accord in a very well ventilated area. Gas fumes can be harmful.
What to do if you spill gas on your Honda Accord?
Place the fluid catch pan under this area to catch any spilled gas. Once the nut is removed, pull the lower fuel line off and set it aside. Then, use the 17 mm flare nut wrench to loosen the Banjo bolt on upper fuel line.
How do you replace a fuel filter clamp?
Unclip the alignment hole holding the top of the fuel filter in place, and then remove the fuel filter from the clamp. Dispose of the old filter and place the new fuel filter in the clamp. Then, insert the fuel filter clamp to its original location and secure it with the two 10 mm bolts. Figure 6. Remove and replace the fuel filter from the clamp.
How often should you change the fuel filter on a Honda Accord?
The manufacturer suggests the 2005 Honda Accord’s fuel filter be changed every 60,000 miles. Running you car with an old fuel filter can allow pollutants to flow into your engine and also affect your fuel economy. Replacing the fuel filter on a regular basis will save you money and maximize engine performance.
How do you change the fuel line on a Honda Accord?
Place the fluid catch pan under this area to catch any spilled gas. Once the nut is removed, pull the lower fuel line off and set it aside. Then, use the 17 mm flare nut wrench to loosen the Banjo bolt on upper fuel line. Rotate the wrench counterclockwise to loosen the bolt, and then remove the fuel line by hand.
Place the fluid catch pan under this area to catch any spilled gas. Once the nut is removed, pull the lower fuel line off and set it aside. Then, use the 17 mm flare nut wrench to loosen the Banjo bolt on upper fuel line.
Unclip the alignment hole holding the top of the fuel filter in place, and then remove the fuel filter from the clamp. Dispose of the old filter and place the new fuel filter in the clamp. Then, insert the fuel filter clamp to its original location and secure it with the two 10 mm bolts. Figure 6. Remove and replace the fuel filter from the clamp.