Where is the OBD1 code on a Honda Integra?

Where is the OBD1 code on a Honda Integra?

As a result, Making it way easier to pull the OBD1 trouble codes. Locate the factory diagnostic plug next to the (ECU) for the Integra and Civic. Consequently, You’ll find this plug in the passenger side footwell, underneath the far right hand side of the glove box. So, There is a two-pin connector that contains a brown and black wire.

Where is the Diagnostic Code on a Honda?

There are many resources you can use to check and diagnose these DTCs (diagnostic trouble codes). For 1992-1995 (OBD1) vehicles you can check these yourself by using the method shown in the picture below. In OBD1 Hondas and Acuras there is a diagnostic port and a two-pin connector located under the passenger-side dashboard.

Where is the OBD plug on a 1991 Honda Accord?

The connector may be blue or yellow in color. If the connector has not been used before, you may find it still taped or strapped to the main wiring harness going to the ECU (engine control unit). Insert the jumper wire in the 2 PIN service connector between pins 1 and 2.

Where are the computer code connectors on an Acura Integra?

Additionally, some connectors are located upside down, so some attention needs to be paid to this factor when trying to connect. The key thing to remember, is that since 1996, all auto computer code connectors are found somewhere inside the front passenger compartment. 1999-2001 Acura Integra.

Where are the Honda ABS diagnostic link connectors?

HondaABS Diagnostic Connectors Scan Tool for Codes and Live Data for your Honda ABS from $149.95 Honda ABS – Please select the connector for your vehicle from the options below. Diagnostic Link Connector No. 21 Year range:2000 to 2009 Locations: Under the drivers side dash panel. (Honda ABS) Use This Connector >

There are many resources you can use to check and diagnose these DTCs (diagnostic trouble codes). For 1992-1995 (OBD1) vehicles you can check these yourself by using the method shown in the picture below. In OBD1 Hondas and Acuras there is a diagnostic port and a two-pin connector located under the passenger-side dashboard.

Where is the diagnostic port on a Honda OBD1?

Location of OBD1 Honda Diagnostic Connector. In OBD1 Hondas and Acuras there is a diagnostic port and a two-pin connector located under the passenger-side dashboard. When checking the DTCs you will need to insert a jumper wire from one pin to the other in the two-pin connector.

Where are the ABS codes on a Honda?

Year range:1984 to 1992 Locations: Under the passengers side dash panel. Under the passengers seat. Under the passengers side kick panel. Above the passengers side kick panel. In the center console. Step 4 Honda ABS Code Reading

Where to find OBD I code on Honda Civic?

Honda Motor Corporation OBD I diagnostic trouble codes are retrieveable without any special tools by simply following the instructions here. The codes are listed for Accord or Civic models seperately when required. The codes are defined as to what system is affected. When possible we give the more commonly known OBD II component name.

How to know if your Honda 95 is bad?

9 No.1 cylinder position sensor 10 Intake air temperature sensor 12 Exhaust recirculation system 13 Barometric pressure sensor 14 Idle air control valve or bad (ECM) 15 Ignition output signal 19 A/T lock-up control solenoid

Can a Honda Civic be swapped for an Integra?

-The UCA’s can be swapped Left to right, BUT since the upper balljoint is not symetric (front to back) this swap will cause an increase in Caster. -LCA can be swapped for a 94-01 Integra Lower control arm…. no performance advantage BUT it is easier to find newer Integra LCA’s at the Wreckers.

How can I tell if my Honda Civic is working?

Civics built before 2006 can display the codes on the gauge cluster through a series of flashing lights. Later model Civics will need to pull codes through an OBD2 scanner. These codes will give a good starting point towards figuring out what exactly is malfunctioning.

Is the Honda Integra 88-00 parts compatability?

88-00 Civic/Integra parts compatability. list taken from Moose from SOHCHonda. This is to be the most accurate from what i know between the 88-95 civic. never really tried with the 96-00 civics. I would say that 99% 88-00 parts are changeable. (honda tends to do stuff like that).

When to reset the Check Engine light on Honda Civic?

Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002). The check engine light in your Honda offers important diagnostic information, which will alert you of a serious problem like a bad catalytic converter.