Why is the cruise control on my car not working?

Why is the cruise control on my car not working?

Common Causes of Cruise Control Not Working. 1) Cruise Control Switch; 2) Brake Light Switch; 3) Blown Fuse; 4) Check Engine Warning Light; 5) Vehicle Speed Sensor; 6) Electrical Issues

What does the check engine warning light mean?

If the check engine warning light comes on, it usually means there is a problem with your transmission or engine. Once the engine control unit detects this problem, it may disable your cruise control system in response as a safety precaution. Until you fix the engine issue, the cruise control will stay disabled. 5) Vehicle Speed Sensor

How does a cruise control module detect speed?

The only way your cruise control module is going to know how fast the vehicle is moving is if the vehicle speed sensors feed this information to it. If the module cannot detect the speed because of faulty speed sensors, then the cruise control system will automatically deactivate.

Why is my cruise control light not working?

Aftermarket lighting, such as LED brake light conversion, might trick the CCM into thinking a brake light is blown, as LED bulbs draw less current than incandescent bulbs. Fuses and Relays – On some vehicles, fuses and relays are used to protect the cruise control actuator circuit.

Can a brake light disengage cruise control?

Brake Light Switch – As cruise control is automatically cancelled by depressing the brake, some vehicles may disengage cruise control if it cannot detect the brake light switch. Brake Lights – In some systems, cruise control is disabled when a brake light is blown.

What does it mean to have cruise control?

Cruise control is a system to maintain vehicle speed without direct driver input. When you want to engage cruise control, you first turn the system “On” with a button or switch. However, this alone does not start the cruise control.

Brake Light Switch – As cruise control is automatically cancelled by depressing the brake, some vehicles may disengage cruise control if it cannot detect the brake light switch. Brake Lights – In some systems, cruise control is disabled when a brake light is blown.

How does an adaptive cruise control system work?

Adaptive cruise control systems, sometimes called “smart” cruise, use radar or laser detection to maintain safe distances from vehicles ahead. Some adaptive cruise control systems merely reduce engine speed to maintain distance, but some of the newest adaptive cruise control systems can also engage the brakes to slow or stop the vehicle.

Common Causes of Cruise Control Not Working. 1) Cruise Control Switch; 2) Brake Light Switch; 3) Blown Fuse; 4) Check Engine Warning Light; 5) Vehicle Speed Sensor; 6) Electrical Issues

Adaptive cruise control systems, sometimes called “smart” cruise, use radar or laser detection to maintain safe distances from vehicles ahead. Some adaptive cruise control systems merely reduce engine speed to maintain distance, but some of the newest adaptive cruise control systems can also engage the brakes to slow or stop the vehicle.

Why does my GMC Sierra 1500 cruise control not work?

Cruise control does not work properly,when descending down a hill,the truck picks up speed,there is no hold back,it just like it free wheels. See all problems of the 2004 GMC Sierra 1500 . Cruise control does not hold back in down hill decent,it just free wheels, set at 45 mph,it will go to 60 or faster until you put on the brakes.

How do you turn off cruise control on a Chevy Silverado?

This action signals the cruise control module (or powertrain control module) to monitor the speed sensor and actuate the throttle as necessary. To turn cruise control off, the driver can either select “off” on the switch or close the stoplamp switch on the brake pedal assembly.

This action signals the cruise control module (or powertrain control module) to monitor the speed sensor and actuate the throttle as necessary. To turn cruise control off, the driver can either select “off” on the switch or close the stoplamp switch on the brake pedal assembly.

Where can I find the cruise control switch?

This switch can be found on the steering wheel, although some switches can be found on the dashboard. If only one setting on your cruise control does not work, chances are high that the switch is the problem. Test the switch the same way the brake switch is tested.

Where is the cruise control fuse on a Chevy Silverado?

A good fuse (on the left) compared to blown fuses (on the right). This switch is located on the brake pedal assembly and allows current to flow to the cruise control module to signal cruise deactivation.

How does an electromechanical cruise control system work?

Your version is electromechanical, which means that the throttle pedal is directly connected to the throttle body through a cable, and the cruise control is achieved by way of a servomotor that sucks in that cable and holds it in place.

What to do if your Cruise Control is inoperative?

Apply vacuum using the hand held vacuum pump. If the servo fails to hold vacuum, replace it with a new part. This part can be purchased at your local part store or dealer. If both tests are good, this means that the cruise controller is inoperative and must be replaced. This part can also be found at your local parts store or dealer.

The only way your cruise control module is going to know how fast the vehicle is moving is if the vehicle speed sensors feed this information to it. If the module cannot detect the speed because of faulty speed sensors, then the cruise control system will automatically deactivate.

When does the CCM increase or decrease throttle body opening?

When vehicle speed increases or decreases (due to wind or hills, for example), the CCM decreases or increases throttle body opening accordingly. By modulating engine speed, the CCM can maintain your desired cruising speed on the highway.

Why is my traction control not working on my terrain?

Traction Control Not Working – Your Terrain’s traction control system mostly uses the same sensors to determine if a wheel has broken traction. Unlike StabiliTrak, which controls lateral issues (sliding), traction control keeps the wheels from unnecessary spinning.

What should I do if my GMC Terrain wont reboot?

Gm recommends that you power down the vehicle for 15 seconds to give the StabiliTrak time to reboot. If it works after firing your Terrain back up, great! If not, it may be time to have it serviced.

What to do if your Cruise Control is not working?

Troubleshooting Your Car’s Cruise Control. If you hear a sucking sound then the vacuum lines connecting the actuator and the control module is worn out or damaged. If you cannot hear any sucking sound, visually check the vacuum lines and look for leaks. Have your leaking vacuum lines replaced by an auto mechanic.

How does Service StabiliTrak work on GMC Terrain?

If you have a service StabiliTrak warning, your Terrain will no longer be assisted when a loss in lateral traction is detected. StabiliTrak is a GM specific vehicle stability system. It works by using a complex system of sensors to detect whether or not the vehicle is properly responding to your input in emergency situations.

Where are the dropout codes for cruise control?

The module stores the last 8 dropout codes starting with the most recent dropout. if you want to verify the flashes you just saw, then push the switch to RESUME and it will repeat the three digit code that you just read….. That bike still uses throttle cables and has a seperate cable from the cruise module/servo to the throttle body.

What will cause the cruise control to stop working?

• Bad Speed Sensor
• Bad Brake Pedal Switch. The brake pedal switch is what’s responsible for turning on the brake lights on your car when you step on the brake pedal.
• they’re protected by a fuse.
• Damaged Cruise Control Cable or Vacuum Actuator.

  What would make my cruise control to stop working?

  Common Causes of Cruise Control Not Working Cruise Control Switch. The cruise control switch is what you use to set your cruising speed. Brake Light Switch. Normally, you press the brake pedal to turn off cruise control. Blown Fuse. The electrical components of the cruise control system are protected by fuses. Check Engine Warning Light. Vehicle Speed Sensor. Electrical Issues.

  Why would a cruise control stop working?

  There are a number of reasons for why cruise control is no longer working as it should. One common explanation is that your vehicle has developed a bad fuse. The cruise control is locked into your car’s electrical system, so if even one fuse stops working, it can prevent you from carrying out basic functions.

  How do I Fix my cruise control?

  Points for how to fix cruise control. Lift the front portion of your car on a jack stand. Get to the bottom of the car and locate the plug-like looking sensor protruding out from the transmissions. Observe the wires and cables that are coming out of it.

  Is it dangerous to drive without cruise control?

  While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

  What is the VSA indicator on a 2005 Honda CRV?

  2005 Honda: the VSA indicator..check engine..accelerating..sputter… I have a 2005 Honda… I have a 2005 Honda CRV. Yesterday, the VSA indicator and the triangle with exclamation point lit up along with the check engine indicator. Shortly after (within 1 to 2 seconds), while accelerating, the engine seemed to sputter until I let up off the gas.

  What causes VSA light to go out on Honda CRV?

  Shortly after (within 1 to 2 seconds), while accelerating, the engine seemed to sputter until I let up off the gas. Pushing the VSA Off button on the dash did nothing. I stopped the car, turned off the engine, and restarted the car. The engine light stayed lit and the VSA and triangle went out for a few seconds and lit up again.

  What are the relays on a Honda CRV?

  A/C Compressor Clutch Relay, A/C Condenser Fan Relay, Blower Motor Relay, Power Mirror Switch, Radiator Fan Relay, Rear Window Defogger Relay, Recirculation Control Motor, Seat Heater Relay, Heater Control Unit (Panel)

  Why is the brake warning light on on my Honda CRV?

  If your Honda CR-V’s brake warning light is on, and you’ve checked the emergency brake, you’ll need to look for a leak in the lines, calipers, wheel cylinders, master cylinder, etc. Good luck diagnosing the issue. If there is anything that you would like to add, please leave a comment below.

  Most common reason for cruise issues is, broken front brake switch. Or brake light staying on. Check that 1st. From there, we suggest checking for possible stored diagnostic trouble codes 1st. If there are no clues there, we would begin by testing the cruise control switches with a test light or multimeter.

  How can I diagnose my cruise control issue?

  You’ve already diagnosed your cruise control issue; there is something wrong in your brake light circuit. That is what you need to diagnose. Inspect function of your front & rear brake lights. Make sure that your front switch is not sensitive. If the brake light can be triggered by vibration, it will cancel your cruise.

  What to do if your Honda CRV is having trouble stopping?

  If your CR-V is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic. If you mess up fixing your engine, the vehicle does not move. If you mess up fixing the brakes, it doesn’t stop.

  When does the cruise control light come on?

  Hello. Subaru has designed their vehicles to turn on the cruise control light when their is a problem with the power train system. This keeps you from using the cruise control when there is a problem. If there is a catalytic converter code then it may be a failure in the converter or an issue with an oxygen sensor.

  Hello. Subaru has designed their vehicles to turn on the cruise control light when their is a problem with the power train system. This keeps you from using the cruise control when there is a problem. If there is a catalytic converter code then it may be a failure in the converter or an issue with an oxygen sensor.

  If the check engine warning light comes on, it usually means there is a problem with your transmission or engine. Once the engine control unit detects this problem, it may disable your cruise control system in response as a safety precaution. Until you fix the engine issue, the cruise control will stay disabled. 5) Vehicle Speed Sensor

  This switch can be found on the steering wheel, although some switches can be found on the dashboard. If only one setting on your cruise control does not work, chances are high that the switch is the problem. Test the switch the same way the brake switch is tested.

  How do you troubleshoot cruise control?

  The troubleshooting process is normally done by using a scan tool. However, if one is not available, check the following in the given sequence: The cruise control set switch and the connections to it. The cruise control resume switch and the connections to it. The brake light switch and the connections to it.

  Where is the cruise control fuse?

  A power surge can easily blow out the fuse of your cruise control mechanism. The cruise control fuse is normally found in the fuse panel located below the steering wheel.

  Where is the fuse for the cruise control?

  The cruise control fuse is normally found in the fuse panel located below the steering wheel. Remove the cover of the fuse panel and locate the fuse for the cruise control using the fuse diagram on the fuse panel.

  What to do if your Cruise Control is broken?

  Using a fuse puller, pull the fuse off the panel. Examine the cruise control fuse or use a fuse tester to determine if the thin metal strip inside the fuse is broken. If so, install a fresh fuse of the same amperage. A cruise control mechanism has a vacuum-powered actuator connected to the control module by vacuum lines.

  Where is the fuse on the cruise control?

  Figure 1. A good fuse (on the left) compared to blown fuses (on the right). This switch is located on the brake pedal assembly and allows current to flow to the cruise control module to signal cruise deactivation.

  What are the symptoms of a bad cruise control switch?

  Cruise control light doesn’t illuminate. One of most common symptoms of a problem with the cruise control switch is a cruise control light that will not illuminate. The light should be illuminated as soon as the cruise control system is switched on to notify the driver that the system is activated.

  What happens when your cruise control goes to 70?

  The kids in the back seat have stopped threatening to throw up, too. Then you look in your mirror 20 miles later and see the lights. Red and blue flashing lights. You’re doing over 85 mph and, odds are, Smokey isn’t going to believe you have the cruise set to 70. Time to find out why your cruise control has a mind of its own.

  Why won’t my cruise control work?

  Fuses and Relays – On some vehicles, fuses and relays are used to protect the cruise control actuator circuit. If the fuse is blown or the relay is faulty, the system won’t work.

  Why do you need an aftermarket cruise control kit?

  Aftermarket cruise control kits offer a lot of convenience to vehicle owners including; better fuel economy – higher vehicle resale value – less driver fatigue on those long trips. Some people may buy a new car and think that they don’t really need or want cruise control, only to find out otherwise later on.

  How often do you set cruise control on a Ford?

  Ford is trapped between a rock (how drivers really drive) and a hard place (the annoying-ness of safety zealots and the tort system). In the US at least, on 65 mph Interstate highways, drivers routinely set cruise control for 10 mph over, sometimes 15.

  When is it not safe to use cruise control?

  When you SHOULDN’T use cruise control Don’t use cruise control when it’s raining, snowing, or when there are wet/ icy roads in general. While some newer vehicles have features that help your car handle wet roads and rain even while cruise is on, it’s best to be in total control of your car when you are driving in these conditions.

  What do you call the cruise control on a car?

  The cruise control in your vehicle is also known as speed control or autocruise. It is a system that controls the speed of your vehicle for you, while you maintain steering.

  What happens when you set cruise control to 70?

  Basically, it takes over the throttle to keep the speed consistent as it was set by the driver. For example, if you set the cruise control to 70 mph, the vehicle will go 70 mph straight, up, or down hills and stays on until you hit the brake.

  What does the cruise control warning light mean?

  What the cruise control light means. Most cruise control lights use 2 different colors to let you know what state the system is in. Typically, the cruise control light will be orange when the system is on, but a speed hasn’t been chosen yet. Once a speed is selected, this light will turn green. If the computer has detected an issue,…

  How to fix a Honda CRV cruise control?

  You can’t post conmments that contain an email address. An expert that got 20 achievements. An expert that got 10 achievements. An expert that got 5 achievements. The tests are in the FSM. get that and read…….. buy the FSM from , Honda. login to alldata.com BINGO ! The leading provider of original…

  Is there power to the cruise control system?

  Case Details: There is power to the dash to set the cruise control and power to the fuse but the system will not engage and hold speed. A mechanic says there is no power to the pump. The pump is not powered on all the time. It is completely controlled by the PCM that tells it when to operate.

  What to do if your cruise control hangs?

  If it appears to hang, insert the Torx tool in the same side where the lifting is being attempted and unscrew it while simultaneously pulling on the airbag. Once the airbag is free, slide it away from the other side and lift it out. Using a pick, lift the retainer in the center of each airbag connector and unplug the connections.

  What to do if your cruise control stops working?

  That bike still uses throttle cables and has a seperate cable from the cruise module/servo to the throttle body. Make sure it is still hooked up and in tact. Then check your cruise fuse. Then go the diagnostics as listed above. Turn your ignition on and see if your brake light is on without applying the brakes.

  What does the cruise control switch do on a car?

  The cruise control switch is what you use to set your cruising speed. This information is transmitted to the engine control unit and cruise control module in order to sustain the acceleration speed.

  What to do when your brake lights are not working?

  In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.

  Why are the rear lights on my car not working?

  The causes for dysfunctional rear lights are: 1 Burnt bulbs 2 Blown out fuse 3 Damaged wiring 4 Electrical issues

  Where are the brake lights on my car?

  You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.

  Can a bad brake release switch cause a bad cruise control?

  One of the symptoms commonly associated with a bad cruise control brake release switch is a cruise control system that cuts off unexpectedly. If the switch has any sort of contact or internal issues, it may cause the cruise control system to cut off unexpectedly when activated, even if the pedal is not stepped on.

  When do you switch off the cruise control?

  Usually the cruise control will have to be switched off by hand in order to stop the vehicle from continuing to accelerate. The cruise control brake release switch is an important component in maintaining the proper functionality of the cruise control system.

  Why does my cruise control cut off when I step on the pedal?

  If the switch has any sort of contact or internal issues, it may cause the cruise control system to cut off unexpectedly when activated, even if the pedal is not stepped on.

  One of the symptoms commonly associated with a bad cruise control brake release switch is a cruise control system that cuts off unexpectedly. If the switch has any sort of contact or internal issues, it may cause the cruise control system to cut off unexpectedly when activated, even if the pedal is not stepped on.

  What happens when a cruise control release fails?

  When it fails, it can cause issues with deactivating the cruise control system, which in certain scenarios can be a safety concern. Usually a bad or failing cruise control brake release switch will produce a few symptoms that can alert the driver of a potential problem that should be serviced as soon as possible.

  Usually the cruise control will have to be switched off by hand in order to stop the vehicle from continuing to accelerate. The cruise control brake release switch is an important component in maintaining the proper functionality of the cruise control system.

  How does cruise control work in a car?

  The cruise control feature works to maintain the vehicle at a constant speed without the need to step on the accelerator pedal. Once activated, the cruise control system will keep the vehicle at a constant speed or rate of acceleration until it is switched off manually or the brake pedal is stepped on.

  Why does my car cruise control not work?

  The most common reason why a cruise control does not work is either faulty switch or brake light switch. Of course, there are other reasons why cruise control may work and we will explain some in the video.

  What happens if you have a bad brake light switch?

  The brake light switch on modern vehicles is no longer a simple switch used to turn on the brake lights. A bad brake light switch, for example, can trigger the ABS and traction control lights, but it can also prevent engine start or even transmission shifting. In this article, we go over the symptoms of a bad brake light switch and test them.

  How to adjust the brake light switch on a car?

  1 Adjust Brake Light Switch (if there is room.) 2 Brake Light Fuse 3 Brake Light Stopper / Bumper Pad 4 Brake Light Wire Harness More …

  Why does my cruise control turn off when I Touch the brake?

  Brake lights? Yup, cruise controls have a switch to toggle them off when you touch the brake pedal, and many use the same switch as the brake lights. If one of the brake lights has failed, the cruise control thinks the brakes are on all the time and won’t come on. Same result if the switch is incorrectly adjusted or broken or jammed.

  Cruise control light doesn’t illuminate. One of most common symptoms of a problem with the cruise control switch is a cruise control light that will not illuminate. The light should be illuminated as soon as the cruise control system is switched on to notify the driver that the system is activated.

  How does cruise control work with exhaust brake-chassis?

  One enables the “exhaust brake”, one the Cruise Control (there is also a separate “set” switch for the cruise control.) Turning on the exhaust brake switch disables the cruise control. This is correct, and seems a good safety feature.

  When to replace a cruise control brake release switch?

  For this reason, if you suspect that your cruise control brake release switch may be having an issue, have the vehicle inspected by a professional technician, such as one from YourMechanic, to determine if your car needs a cruise control brake release switch replacement.

  What do you do if your Cruise Control is not working?

  You can increase or decrease cruise speed by tapping a button or lever, and you can cancel cruise control by hitting the “Cancel” or “Off” buttons or stepping on the brake. This electronically-controlled throttle body is modulated directly by the engine control module, both for direct driver input and cruise control.

  How does a cruise control system work in a car?

  Early systems used a vacuum motor and cable, but these eventually changed over to electric motors. Most recently, with the development of drive-by-wire or electronic throttle control systems (ETCS), cruise control is built into the engine control module (ECM), which controls the throttle body electronically.

  Why does cruise control not work when brake light is blown?

  Brake Lights – In some systems, cruise control is disabled when a brake light is blown. Aftermarket lighting, such as LED brake light conversion, might trick the CCM into thinking a brake light is blown, as LED bulbs draw less current than incandescent bulbs.

  How are the warning lights displayed on a Jaguar?

  If a warning message is displayed along with a red warning light (highest priority), investigate the fault immediately. If more than one message is active, each is displayed in turn for two seconds in order of priority. Displayed when the brake fluid level is low. Depending on your location, warning light may be displayed in red letters BRAKE.

  Can a steering wheel mounted cruise control switch be replaced?

  Compatible Replacement for Ford & Mercury Vehicles – Replace the worn out cruise control switch on the steering wheel on your Explorer Sport Trac, Ranger, Explorer, F150, Mountaineer OEM Quality, Fit, and Finish. Save over 50% compared to purchasing the factory Part F87Z9C888BB Make your cruise control switches new again

  How to troubleshoot a Ford Cruise Control System?

  Check the cruise control module and combination stalk. These units rarely, if ever, fail. However, if the unit is bad, you’ll want to know. Remove the screws holding the steering wheel column cover in place and pull the cover off the steering column with your fingers.

  What the cruise control light means. Most cruise control lights use 2 different colors to let you know what state the system is in. Typically, the cruise control light will be orange when the system is on, but a speed hasn’t been chosen yet. Once a speed is selected, this light will turn green.

  What do the warning lights on a Mitsubishi mean?

  For example, the minimum speed is not met, or the engine is not warmed up yet. This light means there is a problem with the Adaptive Cruise Control System. This light means the adaptive cruise control can not start because it can not detect the vehicle in front.

  What the cruise control light means. Most cruise control lights use 2 different colors to let you know what state the system is in. Typically, the cruise control light will be orange when the system is on, but a speed hasn’t been chosen yet. Once a speed is selected, this light will turn green.

  What happens when a cruise control vacuum fails?

  If the cruise control vacuum reservoir fails, the cruise control system will be left without the vacuum it requires to hold the vehicle at a steady speed or rate of acceleration. The cruise control may still try to hold the vehicle at a certain speed, however, it will eventually run low on vacuum which will cause the vehicle to slow.

  Can a certified mechanic diagnose a cruise control problem?

  If you need to have this done, consider YourMechanic, as a certified mechanic can come to your home or office to diagnose your cruise control problem. The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

  Why does my Jeep Wrangler cruise control stop working?

  Driving down interstate, check engine soon light, and traction control light come on, vehicle loses power, decelerates on its own. Cruise control stops working. Have to almost floor gas pedal to keep power going to vehicle. Vehicle then randomly has small burst of acceleration on its own. Occured while driving down I-10.

  Why did my cruise control stop working on my 2002 Forester?

  The Cruise Control on my 2002 Forester S stopped working recently. For some time I had problems engaging the CC altogether, requiring multiple clicks on the activation push-button. Then it stopped working completely. On a retrospect, I may have confused a possibly-bad CC (on-wheel) lever with the button.

  What are reasons for not using cruise control?

  When should you not use cruise control?

  “Any time of the year, you should never use cruise control unless you can drive at a steady speed,” said Ron Wilson, manager, driver education with the Alberta Motor Association .

  Why isn’t my cruise control working?

  The reason for your cruise control not working could be as simple as a blown fuse to really complex electrical problems. Defective switches, sensors, and even “check engine” light, all could contribute to this problem.

  Why does my cruise control not work at all?

  This sensor is the #1 reason your cruise control works intermittently or not at all on your Ford. Follow my easy steps on how to diagnose and you will be fixed in no time and for cheap too. If your cruise does not currently work check this out 90% of the time this is your problem. Torques Spec is 159in Lbs Loading…

  All other controls/lights/GPS all work just fine, just no cruise. Any ideas? Could be many things. Most common are a bad front or rear brake light switch followed by a bad roll off switch.

  The module stores the last 8 dropout codes starting with the most recent dropout. if you want to verify the flashes you just saw, then push the switch to RESUME and it will repeat the three digit code that you just read….. That bike still uses throttle cables and has a seperate cable from the cruise module/servo to the throttle body.

  Is the cruise control on my GM Truck working?

  The cruise control did not work at all when we purchased it, but there were no warning lights or any other noticeable issues with the truck. So, I replaced the Brake Light Switch with one that I purchased from the local GM dealer.

  How often does the cruise control go off?

  While that is happening, the cruise control on/off doesn’t work or respond. After the minute is up, the indication goes off and then the cruise control will work. This happens about 25% of the time that I try to use cruise control. Any idea what could be causing this?

  What happens if the cruise control reservoir fails?

  If the cruise control vacuum reservoir fails, the cruise control system will be left without its necessary vacuum reserve, and as a result, will not be able to hold the vehicle at the set speed or rate of acceleration. 3. Engine performance issues

  If you need to have this done, consider YourMechanic, as a certified mechanic can come to your home or office to diagnose your cruise control problem. The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

  What are the symptoms of a bad cruise control vacuum?

  Speed surges while cruise control is engaged One of first symptoms most commonly associated with a problematic cruise control vacuum reservoir is the speed surging while the cruise control is engaged.

  What causes the cruise control light to flash with an illuminated check engine light?

  What could cause the cruise control light to flash along with an illuminated check engine light on the Subaru? There may be no cause to worry if the cruise control light is flashing. This is meant to occur when the check engine light comes on because the system goes into a ‘fail-safe’ mode.

  Why is my cruise control not working on my Subaru Forester?

  In case the engine is running normally, it is safe to drive the Subaru with the light on; however, the cruise control will not work. What is the reason for the cruise control light and the cruise control to stop working on the Subaru Forester?

  Hi there, thanks for writing in. Usually the P0717 OBD-II error code is associated with a speed sensor problem inside the transmission. This part helps to monitor the cruise control along with the speedometer.

  How do you turn off cruise control on a car?

  Normally, you press the brake pedal to turn off cruise control. The brake light switch must be detected by the cruise control system for this to happen. If it cannot detect the switch, then cruise control will disable itself automatically until the brake light switch issue is fixed.

  Where is the wire for the cruise control?

  My truck occasionally is turning over 2 or 3 times and then starting and resets the clock. If the mechanic finds what the problem is I will let everyone know if I don’t get it fixed tonight which is doubtful. The wire is located just to the left of the brake pedal.

  Why is my AC vent not working on my Jeep Wrangler?

  They found it and plugged it back in, and sure enough, my AC vent control worked again, and later once I got up to highway speed, cruise control worked again.

  Why are the vents on my Honda Civic not working?

  If you turn on the air or heat the but the vents down blow, there is a flap actuator that controls the vents in the car that is burned out. This fixed my 98 honda civic problem. Category Autos & Vehicles Show moreShow less Loading… Advertisement AutoplayWhen autoplay is enabled, a suggested video will automatically play next.

  Why is my HVAC vent selector not working?

  I have an ’02 TJ X and am having trouble with my HVAC vent selector. It will not switch into upper vent mode, only have the option to have it all on my feet, or feet and windshield. I searched but didnt find any real solutions. Help?

  What does the cruise control light look like?

  Most cruise control lights use 2 different colors to let you know what state the system is in. Typically, the cruise control light will be orange when the system is on, but a speed hasn’t been chosen yet. Once a speed is selected, this light will turn green.

  Is it safe to drive with the cruise control light on?

  Some common faults that cause this light to stay illuminated include a blown fuse, faulty brake switch, or malfunctioning speed sensor. Is it safe to drive with the cruise control light on? If everything is working as intended, then yes, it is safe to drive your car even when this light is illuminated.

  Most cruise control lights use 2 different colors to let you know what state the system is in. Typically, the cruise control light will be orange when the system is on, but a speed hasn’t been chosen yet. Once a speed is selected, this light will turn green.

  Some common faults that cause this light to stay illuminated include a blown fuse, faulty brake switch, or malfunctioning speed sensor. Is it safe to drive with the cruise control light on? If everything is working as intended, then yes, it is safe to drive your car even when this light is illuminated.

  Why is it dangerous to use cruise control on hills or?

  The cruise control can’t see them either. Ford’s manual states: “When you are going downhill, your vehicle speed may increase above the set speed. The system will not apply the brakes. Change down a gear to assist the system in maintaining the set speed.” That hill warning is there because the car companies are “worried about runaway vehicles.”

  What to do if your ESC light stays on?

  If the ESC light stays on after you replace the battery, don’t panic. All you need to do is drive the car for a few minutes and make sure to make several left and right turns. Once the system does a self-check, it should reset the stability light on its own. Do different tires turn on stability traction light?

  How to turn off Electronic Stability Control ( ESC )?

  On your dashboard, there is an ESC button that may have been pressed accidentally. If that’s the case, you can manually turn the ESC light off. Start the car. Find the switch that says ESC, ESP, or DSC on the dash and press it for three seconds.

  How can I test my Mitsubishi cruise control?

  Since the vacuum develops only when the vehicle is in motion, it cannot be tested. The following test should help find what is wrong: Pull the cruise control lever down to the Set position. Holding the lever down, push the ON Button with the other hand to turn the cruise control light on.

  What does it mean when your cruise control light blinks?

  This puts the system into diagnostic mode and the way the light blinks will indicate where the problem lies. A mechanic will then be able to investigate further. If there is no difference in the light after performing the test, it generally means that the cruise control switch is bad.

  While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

  What does it mean when your Cruise Control is not working?

  A failed cruise control system can be a signal that other repairs may need to be made soon. By examining the cruise control, the mechanic is likely to also inspect other systems on the car including the brake lights and speedometer. While driving without cruise control may be an inconvenience,…

  What happens to the cruise control when you step on the brake?

  When the brake pedal is stepped on, the cruise control brake release switch is tripped and the cruise control system is then cut off. The switch is designed to disable power to the cruise control system when the brakes are applied to prevent the possibility of attempting to slow the vehicle while the engine is accelerating.

  The kids in the back seat have stopped threatening to throw up, too. Then you look in your mirror 20 miles later and see the lights. Red and blue flashing lights. You’re doing over 85 mph and, odds are, Smokey isn’t going to believe you have the cruise set to 70. Time to find out why your cruise control has a mind of its own.

  How does cruise control work on a Chevy Lumina?

  The light on the steering wheel for the cruise control comes on when I push the button. However when I push the “set” button the cruise control does not e … read more I have a 99 chevy lumina, the center brake light works but the left and right brake lights are intermittent.

  Is the cruise control on my Silverado HD working?

  Silverado 2011 cruise control not working but cruise control… Cruise control not working on chevy silverado 2500 HD with hydraulic braking. Just purchased the truck. … read more Vocational, Technical or Tra… Program Coordinator/Profe… I have a 2012 silverado with a brake controller. The cruise

  Why does my cruise control not work properly?

  john b , Defective speed sensor, bad cruise switch/wire connection, bad brake light switch,etc can cause cruise not to work properly. If engine light on, record the code to help diagnose the issue. You may have to find a good Tech. to diagnose and estimate repair. Good luck.

  The light on the steering wheel for the cruise control comes on when I push the button. However when I push the “set” button the cruise control does not e … read more I have a 99 chevy lumina, the center brake light works but the left and right brake lights are intermittent.

  Silverado 2011 cruise control not working but cruise control… Cruise control not working on chevy silverado 2500 HD with hydraulic braking. Just purchased the truck. … read more Vocational, Technical or Tra… Program Coordinator/Profe… I have a 2012 silverado with a brake controller. The cruise

  What are the symptoms of a bad cruise control brake release?

  Another common symptom of a potential problem with the cruise control brake release switch is a cruise control system that stays on even when the brakes are applied. If the cruise control switch fails, it will not be able to deactivate the cruise control system when the brake pedal is depressed.

  When did they start putting cruise control on cars?

  Cruise control has been around since the late 1950s. There was a time when you could only find this convenient feature in a few model vehicles. Nowadays, it seems like virtually every model vehicle on the road has a cruise control feature.

  Why does my Mercedes ASR light keep coming on?

  Step 1: Ensure that the main battery on your Mercedes-Benz is holding a proper charge. Mercedes-Benz cars are very sensitive to low voltage. An old battery can be the primary cause of BAS/ASR lights staying on. It is common for BAS / ASR lights to come on with a dead battery. It takes a while for a discharged battery to charge fully.

  What to do if Bas ASR light is still on?

  If you are still having BAS/ASR light problem, it may be time to have an auto mechanic or a Mercedes-Benz dealer in your area perform a diagnostic. If you want to figure out the BAS/ASR problem on your own, you will need to get a hold of an advanced diagnostic scanner to do a complete system scan and read the fault codes.

  The fuse panel is under the side cover. Just pop it off. It’s easier if you pull the saddle bag. If it were a fuse, it would be one of the accessory fuses. Fuses typically are not intermittent. They’re either blown or not. Especially the blade style that H-D uses. The 2007 has the older mechanical cruise control.

  Why is my cruise control not working properly?

  Rough idle and a “sucking” sound coming from the engine bay while the engine is running are clear indications that there is a vacuum leak. Vacuum leaks are simply holes in the intake hoses that allow excess air into the system. But if there is a leak, the cruise control will not be able to control the vehicle speed properly.

  Why is the rain sensor on my Mercedes not working?

  Mercedes have the rain sensor mounted up by the rearview mirror. The sensor can technically fail but as you are already noticing there is something else major going on here. Another issue that this particular car developed was the climate control would randomly stop working. Other times the climate control would operate completely normal.

  Are there any problems with my Mercedes Sprinter?

  As long as you stay on top of regular maintenance, the longevity of a Mercedes Sprinter will serve you well. But these vans are not devoid of some major common issues, and these problems are expensive to repair. Sourcing Mercedes parts is a potentially difficult task. And buying parts gets expensive.

  Is the battery on a Mercedes Sprinter locally sourced?

  Because, according to Jalopnik, the only piece of a Mercedes-Benz Sprinter that is locally sourced is the battery. With every other part being shipped internationally and reassembled here in the US, there are only so many parts available. And it’s not like they are shipped for free.

  How does the cruise control work on a Mercedes?

  A Mercedes compatible scan tool should be used to locate the cause after which corrective action can be taken. How does the Mercedes cruise control work? The cruise control is activated when the system is engaged using the cruise control switch/stalk.

  Why is my cruise control not working on my Mercedes CLK 320?

  Is the brake lights remaining permanently on the reason for the cruise control on a 2000 Mercedes CLK 320 not working? If the brake light switch is faulty and sending a message to the cruise control computer that the brakes are being applied, the cruise control will not engage.

  What do you need to know about a cruise control switch?

  The cruise control switch is the electrical switch that is used to control the various functions of the cruise control system. When the cruise control is activated, the vehicle will maintain the set speed or acceleration without the driver having to step on the accelerator pedal. While the cruise control system is not a critical feature to…

  How do you deactivate cruise control on a car?

  Deactivating your car’s cruise control is done by simply applying slight pressure to the brakes. Below are the materials and instructions you will need to troubleshoot problems with your car’s cruise control.

  How does the Mitsubishi cruise control system work?

  The system monitors resistance on the stop light circuit to determine if and when locking the vehicle speed is safe. Any change in the resistance is interpreted by the cruise control system as the application of the brake pedal and results in the cruise control shutting down.

  The fuse panel is under the side cover. Just pop it off. It’s easier if you pull the saddle bag. If it were a fuse, it would be one of the accessory fuses. Fuses typically are not intermittent. They’re either blown or not. Especially the blade style that H-D uses. The 2007 has the older mechanical cruise control.

  What happens when the fuse on the cruise control blows?

  A mechanic will let you know what kind of setup you have on your vehicle. Bad Fuse: Like many electronically controlled systems in your car, the cruise control has a corresponding fuse which will blow to protect the system if it senses a short circuit. When the fuse of for the cruise control blows, the cruise control will stop working altogether.

  Why did my cruise control stop working?

  Is there a fuse for the cruise control?

  Discussion in ‘ Heavy Duty ‘ started by hemi1282, Apr 24, 2015 . Is there a fuse for the cruise control? I can’t find nothing this is really startin to piss me off I use cruise everyday 2 times a day driving an hour to work wtf this is freakin stupid

  Why does cruise control stop working on my Jeep Grand Cherokee?

  If your older car’s cruise has quit on you all of the sudden, this might be why. I have a ’93 Jeep Grand Cherokee, and the cruise control has completely stopped working. Any idea what the problem might be? Cruise control has gone through so many different iterations over the years, it’s almost comical.

  Why is the cruise control not working on my car?

  Spiral Cable – Many vehicles mount the cruise control switch on the steering wheel. A faulty spiral cable may have an open circuit, preventing the switch from contacting the CCM. Control Switch – If the internal contacts wear out, the cruise control switch may not be able to contact the CCM.

  What happens when you disengage the cruise control?

  Just as you uncurl your feet and try to accelerate back to traffic speeds, the vehicle downshifts with a lurch and abruptly climbs back to over 80 mph. So you tap the brakes and disengage the cruise control to avoid a conversation with one of the many law enforcement officers lurking behind every other billboard.

  Can a check engine light cause a cruise to not work?

  If your Check Engine light is on, the cruise may not work, especially if the VSS is malfunctioning. Older vehicles may use speed information from the speedometer.

  What causes a vacuum line to fall off a cruise control?

  If it has fallen off, there’s no vacuum to the actuator and no force can be applied to the throttle. We’ll get ahead of ourselves here and mention that a vacuum line that looks fine may have a subtle leak caused by aging, brittle rubber or connections that don’t seal well.

  Can a burned out brake light cause a cruise control problem?

  A burned-out bulb can sometimes cause a cruise control problem on some F150s What to do: Check the brake light switch, fuse, and wiring. What to do: Check the switches, most likely they are the culprit and need to be replaced.

  Why does my Ford F-150 have cruise control problems?

  Certain vehicles also have a vacuum reservoir tank to prevent loosing vacuum while going up hills, check this tank for leaks as well. These are the most common issues with cruise control problems for Ford F-150 trucks. Most of which are easy fixes and parts are easy to find at BlueSpringsFordParts.com section for F-150 OEM replacement parts.

  What happens when a cruise control brake switch is damaged?

  Some of the other symptoms of a bad of faulty cruise control brake switch include: Cruise control does not set: When the cruise control brake switch is damaged, it usually does not allow the electrical circuit to complete. This keeps the circuit “open,” which essentially tells the cruise control that the brake pedal is depressed.

  When does the cruise control warning light turn off?

  Once a speed is selected, this light will turn green. If the computer has detected an issue, this light will stay orange and likely won’t turn off until the problem has been remedied.

  Why is the speed sensor on my car not working?

  If there is a leak, such as a cracked hose or tube, the system won’t work. A vacuum leak might cause the engine to idler higher or set a fuel trim code. Vehicle Speed Sensor – There are usually multiple vehicle speed sensors (VSS) on any given vehicle.

  Why does my cruise control not work when I press the button?

  If you notice that your cruise control does not engage when you press the button, contact a mechanic so they can inspect the vehicle and determine why the cruise control is not working. It may be due to faulty transmission speed sensors.

  How does a cruise control system work on a truck?

  Some older systems, used on cars or trucks that don’t have throttle-position sensors, may have a rod that moves in and out of a magnetic coil to tell the controller the throttle position. There are also two electrically operated solenoid valves. One valve admits vacuum to the diaphragm chamber to add more throttle.

  Where is the cruise control servo on a diesel?

  Diesels and some late models may use a servo that is completely electrical. These usually are mounted on the fenderwell or firewall, and are connected to the throttle by a second throttle cable. Other than keeping the cable lubricated and properly adjusted, there’s not much to fiddle with.

  How can I Fix my Nissan cruise control?

  But if it breaks open (no contact, no voltage to computer) then your cruise will not work at all. Ever. It is an easy fix, The part cannot be bought at the regular auto store even though it looks just like the brake switch. But only from nissan. I also found my friends truck (1995 nissan) has the same switch.

  What happens when you hit the brake on your cruise control?

  The other switch (ASCD Cancel) opens whenever the brake is pressed therefore breaking the circuit sending energy to the cruise control circuit. Now if this switch breaks in the closed position the brake will probably not turn off your cruise control when depressed.

  Why is the cruise control on my cruise not working?

  WHY CRUISE CONTROL IS NOT WORKING. TOP 3 REASONS CRUISE IS NOT WORKING – YouTube WHY CRUISE CONTROL IS NOT WORKING. TOP 3 REASONS CRUISE IS NOT WORKING

  Is the cruise control on my 1993 J30 working?

  Background – We have had a 1993 J30 for many years and the cruise control never worked. The light on the dash button would come on; however, there was never any indication that the cruise control would engage. Yesterday, I decided to work on it again and got it working.

  But if it breaks open (no contact, no voltage to computer) then your cruise will not work at all. Ever. It is an easy fix, The part cannot be bought at the regular auto store even though it looks just like the brake switch. But only from nissan. I also found my friends truck (1995 nissan) has the same switch.

  What happens when cruise control is not set?

  INFINITI NISSAN CRUISE CONTROL WILL NOT SET ENGAGE. EASY FAST FIX!!! – YouTube INFINITI NISSAN CRUISE CONTROL WILL NOT SET ENGAGE.

  Why does my brake not turn off cruise control?

  The one on the left is your brake switch, it contacts whenever the brake is pressed. The other switch (ASCD Cancel) opens whenever the brake is pressed therefore breaking the circuit sending energy to the cruise control circuit. Now if this switch breaks in the closed position the brake will probably not turn off your cruise control when depressed.

  Where are the switches on the cruise control?

  There are 2 switches connected behind your brake. The one on the left is your brake switch, it contacts whenever the brake is pressed. The other switch (ASCD Cancel) opens whenever the brake is pressed therefore breaking the circuit sending energy to the cruise control circuit.

  What would cause my cruise control to stop working?

  There are many possible reasons for the cruise control to stop working. Diagnostics would have to be carried out to determine the cause and carry out necessary repairs. Most common fault would be the brake switch and fuses. If speedometer is not working, the cruise control would not work as well.

  Do you clear trouble codes before resetting airbag light?

  Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.

  Why does my airbag light keep coming on?

  The engine and airbag lights are some of the dashboard lights that you need to take a particular interest in. Airbags are designed in such a way that they inflate whenever there is a collision. However, faulty sensors can cause your airbag light to remain continuously on.

  Is the airbag light disables cruise control?

  But if anyone else knows if the airbag light disables cruise control that would be great to know! No, the airbag light will not affect the cruise control. nealinator wrote: No, the airbag light will not affect the cruise control. This. Neither will TPMS light. And yes, change the brake light switch and see what happens.

  Can you change the brake light on cruise control?

  No, the airbag light will not affect the cruise control. nealinator wrote: No, the airbag light will not affect the cruise control. This. Neither will TPMS light. And yes, change the brake light switch and see what happens. Cheap, easy and very often the culprit.

  When the brake pedal is stepped on, the cruise control brake release switch is tripped and the cruise control system is then cut off. The switch is designed to disable power to the cruise control system when the brakes are applied to prevent the possibility of attempting to slow the vehicle while the engine is accelerating.

  There are 2 switches connected behind your brake. The one on the left is your brake switch, it contacts whenever the brake is pressed. The other switch (ASCD Cancel) opens whenever the brake is pressed therefore breaking the circuit sending energy to the cruise control circuit.

  Why does my Altima not move when I press the gas pedal?

  Altima QR too. Good question…..if the motor was not revving up and the car won´t move, seems the TPS at the acc pedal assembly, is faulty..but the SES light should be on. This experience was with a friend’s car of mine…

  What causes a cruise control to stop working?

  If that signal is lost, the CCM can’t detect vehicle speed, disabling cruise control. Electrical Problems – As most cruise control systems use electrical or electronic components, any diagnosis should include a thorough check of source voltage, wiring harnesses, and connectors. Anything loose or broken could disable the system entirely.

  How much does a cruise control is not working inspection cost?

  received a Cruise control is not working Inspection. Pontiac Montana Cruise control is not working Inspection costs $85 on average. Real customer reviews from Pontiac owners like you. Extremely professional , arrived on time , friendly and got the job done in a timely manner. Would use him again highly recommend him if you’re in need of a mechanic.

  How much is a not working inspection on a Pontiac Montana?

  Pontiac Montana Cruise control is not working Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to Chicago, IL now. Pontiac Montana Cruise control is not working Inspection costs $85 on average.

  What causes cruise control to disengage on Harley Davidson?

  Check your front brake switch actuation/function. If your front brake switch is damaged or misaligned, or aftermarket levers are installed; your cruise will disengage if the module/ecm detects brake function.

  Is there a bad fuse on cruise control?

  Bad cruise control fuse. 2007 ultra cruise problems! Riding along cruise kicks off set cruise again it runs for 15/22 kicks off again it did that a few times now it does nothing no greenlight at all fuses good ! Hi Mike. Check your front brake switch actuation/function.

  A diagram of the stoplamp switch. This switch can be found on the steering wheel, although some switches can be found on the dashboard. If only one setting on your cruise control does not work, chances are high that the switch is the problem. Test the switch the same way the brake switch is tested.

  Is the Ford Cruise Control System infallible?

  The cruise control system in most Ford vehicles is pretty reliable. Still, it’s not infallible. You may experience problems with the cruise control module after years of use. When this happens, the only thing you can do is determine the problem.

  Why is my cruise control not working on my Subaru?

  The problem could have been triggered because of the ignition coil or spark plugs, especially if the weather is wet. In order to confirm where the problem lies, the Subaru needs to be scanned for codes. In case the engine is running normally, it is safe to drive the Subaru with the light on; however, the cruise control will not work.

  What could cause the cruise control light to flash along with an illuminated check engine light on the Subaru? There may be no cause to worry if the cruise control light is flashing. This is meant to occur when the check engine light comes on because the system goes into a ‘fail-safe’ mode.

  How does the cruise control work on a Chevy Silverado?

  To set the cruise at the desired speed, a driver pushes an input on the cruise control switch. This action signals the cruise control module (or powertrain control module) to monitor the speed sensor and actuate the throttle as necessary.

  How is yer cruise control connected to the ECU?

  Yer cruise control is powered through various fuses. 10A Engine, 10A Gauge and is connected through the ECU. Various switches give feedback to the cruise control box (brake/clutch switches fer example) to deactivate when those switches are closed (stepped on). Those switches will not keep the cruise control from being activated.

  Is the 10A gauge the cruise control light?

  The 10A Gauge definitely controls the Cruise Control light…but that would mean yer other gauges wouldn’t be working either. On a separate note, I see that yer brake reservoir is new…but it’s the older type with the low fluid sensor float on top. It should be the one that’s incorporated in the bottom of the reservoir.

  When did the cruise control start faltering?

  In December 2016, the cruise control started faltering – it would work sometimes but not others. I took the Brake Light Switch back to the dealer and they gave me a new one.

  While that is happening, the cruise control on/off doesn’t work or respond. After the minute is up, the indication goes off and then the cruise control will work. This happens about 25% of the time that I try to use cruise control. Any idea what could be causing this?

  How does resume switch work on cruise control?

  Toggling the Resume switch settles things down, holding to a legal speed on both the uphill and downhill sections of the interstate. The kids in the back seat have stopped threatening to throw up, too. Then you look in your mirror 20 miles later and see the lights.

  Where are the brake lights on a cruise control?

  An aftermarket cruise may have an inline fuse holder in the wiring to the controller. If there is power to the system, the next check is the brake lights. Brake lights? Yup, cruise controls have a switch to toggle them off when you touch the brake pedal, and many use the same switch as the brake lights.

  What is the error code for the cruise control brake switch?

  On most OBD-II scanners, an error code P-0573 and P-0571 are typically the codes that indicate a problem with the cruise control brake switch. However, if you don’t receive this error code, or don’t have a scanner to download error codes, you’ll have to do some self-diagnosis checks.

  What’s the best way to reset the cruise control?

  Step 4: Set your cruise control at 55 or 65 MPH. After the cruise control is set, slightly tap your brake pedal to verify the cruise control shuts off Step 5: Reset the cruise control again and drive for 10 to 15 miles. Verify that the cruise control does not shut off automatically.

  Why does my check engine light go off at night?

  kwangmoo/123rf. An aftermarket alarm can wreak havoc on your car if it’s not installed properly. It can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. Then, when you least expect it, it’ll go off in the middle of the night because a leaf from an oak tree fell on the hood.

  When does cruise control and engine brake quit?

  2006 western star 4900fa cruise control and engine brake quit after truck warms up. both work fine prior to warm up. Have truck repair questions? Ask an Expert By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them.

  Why does my cruise and Jake not work?

  Most common item to cause the cruise and Jake not to work is a faulty clutch switch siganl to the ECM. Since you have replaced the clutch switch. We know it’s not the problem.

  What kind of cruise control does Western Star have?

  2006 western star 4900fa cruise control and engine brake quit after truck warms up. both work fine prior to warm up. looking for schematics and or theory of operation. vehicle has new clutch switch, some new harnesses, new Jake solenoids, vin 36pv27932 , cat serial # ***** cat# ***** Experience: I am ASE Master Truck Certified.

  Why did my Chrysler 300M cruise control go off?

  Why did the Chrysler cruise control go off simultaneously with the horn, airbag and all fuses in the fuse box of a Chrysler 300M? First, check the clock-spring in the steering column as it could have failed. The spring consists of a thin ribbon which winds and unwinds when the steering wheel is rotated and can break overtime.

  What are the symptoms of a bad ABS control module?

  1. Unresponsive brake pedal. In certain cases, depending on the model of vehicle, when the ABS module fails, the brake pedal may become unresponsive. This is an obvious problem, as an unresponsive brake pedal will not stop a vehicle, or will not be able to do so in an adequately safe manner.

  Is there an ABS and traction control light on the dash?

  Q: ABS and traction control light on dash. cruise control doesn’t work. ABS and traction control light came on about a week ago. Normal driving conditions. Cruise control doesn’t work. No codes on diagnostics machine. Brakes are a little different than normal. Still drives, no pulling to a side. I’ve researched and saw ABS wheel speed sensor.

  Why do I have no ABS code on my car?

  You will have to monitor the wheel sensors if you get no codes, but if the light is on there is a code stored in the ABS module. One of the wheel sensors is failing and will cause all the problems you’ve mentioned. A scanner that can access the ABS of the car is needed for this diagnosis.

  If the cruise control vacuum reservoir fails, the cruise control system will be left without the vacuum it requires to hold the vehicle at a steady speed or rate of acceleration. The cruise control may still try to hold the vehicle at a certain speed, however, it will eventually run low on vacuum which will cause the vehicle to slow.

  Why is my central air conditioner not working?

  Several different kinds of problems can occur with a central air-conditioning system. We discuss the following common ones below: Clean the central air conditioning compressor, located outdoors, before every cooling season.

  Why is my air conditioner not working on my Boat?

  If the strainer is clear but an insufficient amount of water seems to be running through the system anyway, the cause could be a bad water-pump impeller, an easy fix for most skippers. Or it could be the condenser coil.

  Why does my air conditioner freeze up when I Turn on the AC?

  Only two things cause an AC air handler to freeze up: 1) reduced air flow because of dirty filters, coils, or poorly working fans, and 2) low refrigerant level, which a pro must check and, if necessary, recharge. More often than not, the problem comes from reduced air flow.

  Another common symptom of a potential problem with the cruise control brake release switch is a cruise control system that stays on even when the brakes are applied. If the cruise control switch fails, it will not be able to deactivate the cruise control system when the brake pedal is depressed.

  If the switch has any sort of contact or internal issues, it may cause the cruise control system to cut off unexpectedly when activated, even if the pedal is not stepped on.