What type of oil goes in a Tuff Torq hydrostatic transmission?
Tuff Torq recommends using only using approved Tuff Tech drive fluid when servicing any of our transaxles. Only use the fill port (covered by the black cap) to refill unit. You will need approximately 2.2 liters of oil to properly refill the unit if completely empty.
Is Tuff Torq K66 serviceable?
The Tuff Torq Professional Series IHT’s are, K62, K66, K72, K92. They are described as for use in Commercial applications and are designed for “Heavy Usage”, ie, “Ground Engagement” and “Serviceable”, they also have heavier 1″ plus axles.
How do you add oil to a Tuff Torq Transmission?
After placing the transaxle on a bench surface remove the fan & pulley and pry open the black cap and remove magnet (see Fig #1). Invert transaxle to allow the oil to drain from case through the port under the black cap. Refill transmission case with oil through same port to near top of the case.
Where is the model number on a Tuff Torq Transmission?
Answer: It is highly recommended that you use Tuff Torq approved sealant. Question: Where is the serial number located? Answer: It is located on the back portion of the transaxle on a white label. Occasionally, a duplicate label will be located under the seat on the mower.
How do you purge air from a hydrostatic transmission?
After the engine is running, move throttle control to slow position. With motion control levers in neutral (N) position, slowly disengage clutch/brake pedal. Step 4-Move motion control levers to full forward position and hold for five (5) seconds. Move levers to full reverse position and hold for five (5) seconds.
How do you change the oil on a Tuff Torq K46?
Support K46 with jack.
- Remove the bolt (13mm) on. the front right side of the K46 to the mounting bracket. Remove the 4 bolts (13mm)
- Remove the magnet from the fill hole – it is the shape. of a coin and standing on end.
- Let it drain. Refill the K46 with new 5W50 synthetic motor oil (takes.
How do you purge a Husqvarna transmission?
How do I know what Tuff Torq Transmission I have?
Product Identification: Tuff Torq Corporation (TUFF TORQ®) barcode labels are the only method to truly identify a product. Tuff Torq will be implementing a new barcode system in 2019. To the right you’ll find first a diagram for the old barcode and second the new barcode.
Is there a tuff Torq parts and service department?
Our parts and service department is always ready to provide support for all our products. The Tuff Torq parts and service team can provide technical support for any issues you might have with any of our products.
What kind of motor oil does a tuff Torq use?
In the JD manual I have it states 10W30 Motor oil as the original fill but now Tuff Torq want the 5W50 which I’m good for too. Thank you so much for taking your time to provide the links. I’ll be keeping this running now for many years to come.
What kind of oil do I need for a K51 transaxle?
The K51 & K56 transaxle requires ~ 2¼ liters of TUFF TECH premium hydrostatic drive fluid to bring oil to level as shown in the following illustrations. For service parts or an exploded view of the K51 or the K56 models please visit our website at www.tufftorqparts.com Tuff Torq Aftermarket Services 6041 Hunter Road Talbott TN 37877