How do you reset the airbag light on a Honda Jazz?
How to Reset Honda Fit Jazz SRS Airbag Light without Tool:
- Make sure the ignition switch is OFF.
- Remove panels under the steering wheel to access the interior fuse box.
- Locate and unplugged the SRS interface plug.
- Insert a paper clip or wire to the plug interface.
- Turn the ignition ON (do not start the engine)
What does the code on the air bag indicator mean?
If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected. These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light.
How long does the airbag light stay on?
To start the process get your watch ready and turn the ignition switch from “Off” to “On.” Once the airbag light comes on it will stay on for a total of seven seconds. Once it turns off, you will have a second to turn the ignition back to “Off.” After you have the ignition off for three seconds, you will need to turn the key back “On.”
Is the SRS warning light an air bag code?
These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light. This is a computer controlled system designed to deploy one or more driver, passenger, and side airbags. How to read air bag codes ?
Where is the button to turn off the airbag light?
This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.
What happens if the airbag light stays on?
While the airbag light stays on, the SRS system will not function, and no airbag will deploy in case of an accident. Don’t ignore the airbag light. Get the airbag system diagnosed as soon as possible.
This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.
Do you clear trouble codes before resetting airbag light?
Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.
Do you need scanner to read airbag trouble codes?
Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.