How do I find the IP address of my camera?

How do I find the IP address of my camera?

How to view your IP camera remotely via a web browser

1. Find your camera’s IP address.
2. Open a web browser and type the IP address.
3. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
4. After you change the port, you will need to reboot the camera in order to save the changes.

What is Edimax IP address?

192.168.2.1
For most Edimax routers, the default IP address is 192.168. 2.1, default username is admin and password is 1234.

How do I change the IP address of my camera?

Configuring the IP address of the camera

1. Open a web browser like Internet Explorer then enter the camera’s IP address in the Address bar.
2. Enter your camera’s User name and Password then click OK.
3. Click the Setup tab.
4. Click Basic located at the left side of the page.
5. Select the Configuration Type.

How do I change my Reolink IP address?

How to change camera’s IP Address to static IP address via Reolink Client (New Client)

1. Please launch your Reolink Client and click the “Device Settings” icon.
2. Click Network->Set up.
3. Change the Connection Type in Network Settings from DHCP to Static, then click “Save” to confirm.

How do I install Edimax router?

Quick installation guide for Edimax Router

1. Step one : Cabling installation. Connect the WAN port to the modem. Connect the LAN port (either port 1, port 2, port3 or port 4) to the PC.
2. Step three : Power on the networking devices. power off the modem, Edimax router and your PC. power on the modem.

How do I access Edimax router?

Edimax Router Login Open your web browser of choice and type IP address of your Edimax router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.

How do I change the IP address of my IP camera?

How do I change the IP address on my Reolink camera?

How to Change Camera’s IP Address to Static IP Address via Reolink Client (New Client)

1. Please launch your Reolink Client and click the “Device Settings” icon.
2. Click Network->Set up.
3. Change the Connection Type in Network Settings from DHCP to Static, then click “Save” to confirm.

How do I reset my IP camera to factory settings?

If you want to reset your IP Camera to factory defaults, you can use the following 3 methods. After resetting the device you will lose all your settings except Client Settings. Keep the device powered on for at least 30 seconds to complete its normal startup.

Can you access NVR remotely?

DVRs/NVRs that have a built-in network capability can be accessed over the internet remotely or outside your home network on a computer, desktop video surveillance software, phone apps or web browsers.