How do I bypass Honda VTEC?
This can be easily bypassed with a simple wiring trick: On your engine harness, locate the VTEC oil pressure switch plug/wire (this wire comes from OBD1 ECU pin D6). Use a common T-tap or other method and simply tap this into the VTEC solenoid valve wire (the VTEC solenoid wire comes from OBD1 ECU pin A4).
What is the pressure switch on a Honda p2647?
P2647 HONDA | Rocker Arm Oil Pressure Switch Circuit High Voltage | The VTEC system activates the rocker arm oil control solenoid (VTEC solenoid valve) by command from the engine control module (ECM)/powertrain control
What is the p2647 error code for Honda Accord?
The check-engine-light came on and gave a P2647 error code. This post walks step-by-step through the easy fix. I hope you find this helpful! The vehicle I am working on here is a 2004 Honda Accord (4-cyl).
What does p2647 mean in engine control module?
P2647 Meaning The Engine Control Module (ECM) commands the Rocker Arm Actuator to control the oil hydraulic circuit. Oil flows through the Rocker Arm Actuator to the variable valve timing system to adjust the engine’s valve timing. The variable valve timing (VVT) system is used to improve engine’s performance, fuel economy or emissions.
How much does it cost to diagnose Honda code p2647?
The cost of diagnosing the P2647 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What does the p2647 Honda engine code mean?
Before replacing any parts change the engine oil with the factory recommend oil weight. The factory bulletin suggests that replacing the VTEC oil pressure switch (P/N 37250-PNE-G01, H/C 6737217) take care of the problem. The cost to diagnose the P2647 HONDA code is 1.0 hour of labor.
What does code p2647 on OBD-II mean?
What Does Code P2647 Mean? When an OBD-II equipped vehicle has stored a code P02647, it means that the powertrain control module (PCM) has detected a valve train (rocker arm) malfunction for engine bank one. Bank 1 denotes that the problem has occurred in the bank of the engine which contains the number one cylinder.
What can set the p2652 code on an engine?
The most common problem that can set the P2652 code is the engine oil. Before replacing any parts change the engine oil with the factory recommend oil weight. The factory bulletin suggests that replacing the VTEC oil pressure switch (P/N 37250-PNE-G01, H/C 6737217) take care of the problem.
Is there an easy fix for the p2647 error code?
It is a relatively inexpensive method to help clear sludge from your engine and has been known to eliminate the P2647 issue. No signal getting to the VTEC – Vehicle feels ‘gutless’ at high RPM