How to self diagnose Honda Accord air conditioner?
The audio-HVAC display panel has a self-diagnostic function for heating, ventilation, and air conditioning system. To run the self-diagnostic function, do the following: Turn the ignition switch OFF. Turn the fan switch OFF. Set the temperature control dial on Max Cool, then push the mode control button to select Vent.
When to turn off the a / C on Honda Accord?
When the mode control button is in the MAX COOL position, the audio-HVAC display panel will automatically select the recirculation mode and turn the A/C on. The recirculation switch and A/C switch are disabled and cannot be turned off in this mode. If the audio-HVAC display panel fails to function as described, replace it.
How to self diagnostic a Honda Civic a / C?
The HVAC control unit has a self-diagnostic function for heating, ventilation, and air conditioning system. To run the self-diagnostic function, do the following: 1. Turn the ignition switch OFF. 2. Press and hold the recirculation control and rear window defogger buttons, and turn the ignition switch ON (II).
Where is the diagnostic port on a Honda Accord?
For the 1990 to 1995 Honda Accords, the diagnostic port is located by the passenger’s side kick panel. To access the connector, remove the panel using a Phillips screwdriver. For the 1996 to 2002 Honda Accords, the diagnostic port is located just bellow the bottom edge of the driver’s side dash.
The audio-HVAC display panel has a self-diagnostic function for heating, ventilation, and air conditioning system. To run the self-diagnostic function, do the following: Turn the ignition switch OFF. Turn the fan switch OFF. Set the temperature control dial on Max Cool, then push the mode control button to select Vent.
The HVAC control unit has a self-diagnostic function for heating, ventilation, and air conditioning system. To run the self-diagnostic function, do the following: 1. Turn the ignition switch OFF. 2. Press and hold the recirculation control and rear window defogger buttons, and turn the ignition switch ON (II).
When to cancel the self dianostic function on Honda Accord?
If there are any problems in the evaporator temperature sensor circuit, the A/C indicator will blink DTC 7 or 8. If no DTC’s are found, the indicator will not blink. Turn the ignition switch OFF to cancel the self-diagnostic function.
When the mode control button is in the MAX COOL position, the audio-HVAC display panel will automatically select the recirculation mode and turn the A/C on. The recirculation switch and A/C switch are disabled and cannot be turned off in this mode. If the audio-HVAC display panel fails to function as described, replace it.