How low should tread be before replacing tires?
“Tire Rack’s advice is that if rain and wet roads are a concern, you should consider replacing your tires when they reach approximately 4/32″ of remaining tread depth.” Obviously the tread will wear away over the life of the tire and the volume of its tread grooves will be reduced.
Does tread depth matter on new tires?
New tires typically start with a tread depth of 10/32″ to 12/32″, with some off-road tires topping 15/32″. New tire tread depth is the measurement typically published by tire manufacturers, but it’s not the same as usable tire tread depth. In other words, when a tire’s tread depth is 2/32″, it’s time to get new tires.
What is the thread count on new tires?
Most new passenger car tires have a thread thickness of 10/32 to 11/32 inch (8 to 8.7 mm). Depending on the tread compound, the tread will wear down about 1/32 inch for every 5,000 to 8,500 miles of normal driving. Consequently, a new set of tires may last 40,000 to 70,000 miles on average.
How much tread is too little for tires?
When is Tread Depth Too Low? The minimum legal limit is 2/32 of an inch. This doesn’t mean that tires are perfectly safe if they have 3/32 left of tread. This is simply the limit at which you won’t pass your state safety inspection.
What’s a good tire tread number?
Good tire tread depth will be 6/32 or deeper. If the depth is 4/32, you should start thinking of replacing your tires and getting new ones. 2/32 or less means that you should change your tires ASAP. The amount of tire tread can affect your stopping distance, making a drive in wet or snowy conditions more dangerous.
How do I know if my tire tread is too low?
Place a penny head first into several tread grooves across the tire. If you always see the top of Lincoln’s head, your treads are shallow and worn. If this is the case, your tires need to be replaced. If part of Lincoln’s head is always covered by the tread, you have more than 2/32 of an inch of tread depth remaining.
When to replace tread depth on Discount Tire?
Tire tread below this depth greatly reduces your stopping ability and hydroplaning resistance. Discount Tire recommends replacing tires worn at or below 4/32nds. The penny test can show if your tread depth has worn below 2/32nds of an inch.
What’s the legal tread depth for a tire?
As mentioned above, tires are legally “worn out” In most States when they reach 2/32″ of remaining tread depth. For example, a typical tire that starts with 10/32″ of original tread depth has only 8/32″ of useable tread depth.
Why do winter tires have deeper tread depth?
New winter tires begin with deeper tread depths and more open tread designs than the tires used during the rest of the year. While the extra tread depth allows new winter tires to provide more traction in deep snow, it also contributes to more tread squirm and drivers may…
What should the tread depth be on a Lincoln tire?
Tread Depth. When tires have neared the end of their life, a U.S. Lincoln penny can also be used to confirm the tire’s tread depth. If Lincoln’s entire head is visible, the tire is worn to approximately 2/32″ and is considered legally worn out in most States.