How do you remove a cooling fan connector?
Lift the clip before pulling the male and female plug housings apart, if your plug is so equipped. Use the blade of a slotted screwdriver to lift the clip if you are unable to pull it up with a finger. The plug carries all electrical connections to the fan. Once it is unplugged, the fan power is disconnected.
Where is the coolant expansion tank on a pelican?
Working at the top of the coolant expansion tank, using a flathead screwdriver, release the upper hose retaining clips (green arrows) by prying up. Lever the clip up until it reaches the stop (yellow arrow). 8-cylinder engine: Models with an 8-cylinder engine have two hoses at the top of the expansion tank.
How to disconnect electrical connections to a radiator fan?
Lift the clip before pulling the male and female plug housings apart, if your plug is so equipped. Use the blade of a slotted screwdriver to lift the clip if you are unable to pull it up with a finger. The plug carries all electrical connections to the fan. Once it is unplugged, the fan power is disconnected. Jonra Springs began writing in 1989.
How do you change coolant in a 6 cylinder engine?
6-cylinder engine: Models with a 6-cylinder engine have a single hose to the top of the expansion tank and a cap. I suggest replacing the cap when servicing the tank. Working at the top of the coolant expansion tank, using a flathead screwdriver, release the upper hose retaining clips (green arrows) by prying up.
Where is the electrical plug on a radiator?
Locate the electrical wiring plug connector on the radiator fan. The plug is typically mounted on the lower end passenger side, but may be connected at the center of the fan hub. Check the connector plug for a clip extending from the male end of the plug to the female end, which is secured on the fan shroud. Not all connector plugs have such clips.