Are ABS brake pads different?
If your car has antilock brakes, changing the brake pads is a bit different than what most people are used to. The fluid is put back once you step on the brakes. With an ABS car, you CAN’T force the fluid back; if you do you’ll damage the ABS valve body ($1500).
Are ABS brake pads any good?
The main benefits of an anti-lock brake system (ABS) include. Stopping on ice. As mentioned above, an ABS prevents lock-ups and skidding, even in slippery conditions. Anti-lock brakes have been proven to save lives in some situations by helping drivers keep control of a vehicle.
Do you have to remove calipers to change brake pads?
In most cases, you’ll need to remove the calipers to change the brake pads. For fixed calipers, remove the caliper mounting bolts only if the pads won’t come out the back of the caliper. For floating calipers, remove the two caliper mounting bolts or guide pins.
Do you need to disconnect ABS before changing brake pads?
Here’s what you should know before you attempt to replace disc pads. Does your car come with ABS? If your vehicle is equipped with Anti-Lock Brake Systems (ABS), it may be necessary to temporarily disconnect or remove some of the ABS parts before changing brake pads.
What do I need to change my brake pads?
For fixed calipers, remove the caliper mounting bolts only if the pads won’t come out the back of the caliper. For floating calipers, remove the two caliper mounting bolts or guide pins. Note the location of any bushings or positioner pieces so they can be replaced in their original locations.
How do you install a caliper on an ABS system?
Doing this will prevent any debris trapped in the caliper bore from being sent through the ABS system’s modulator valve assembly. Install the clips and shims from the old pads onto the new set, and install the new pads onto the bracket. Install the caliper over the pads, and bolt it securely to the caliper bracket.
What should I do when replacing my ABS?
When replacing any brake component, the entire brake system must be flushed. Follow OE bleeding procedures and use the recommended brake fluid. Always use fresh fluid from a sealed container. Caution: Never open a bleeder valve or loosen a hydraulic line while ABS is pressurized.