Why is there a warning light on my VW Lupo?
If you have noticed that the engine management warning light has switched on your dashboard, it is most likely a problem with one of the sensors. This is the most common cause on the VW Lupo. This is due to a faulty Lambda sensor.
Why is my VW Lupo coughing and spluttering?
The video is for a VW Polo, but is much the same to fix: If your Lupo is idling very roughly, coughing and spluttering and could also be cutting out when you are driving, the most likely cause is faulty spark plug leads. This is usually the problem if the engine management warning light isn’t on.
What does the yellow pressure light mean on a VW?
This error code means you should please refuel (you will hear a 1x audible warning). Stop—the red oil can and yellow pressure warning lights means there is no oil pressure, please turn engine OFF. See owner’s manual (you will hear a 3x audible warning) or consult your local authorized VW dealership.
What does the VW check engine warning light mean?
On VW cars, this is called the Emissions Control or Engine Management Lamp, but you’ll probably know it as the check engine light. When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.
Why is my Volkswagen Lupo engine cutting out?
Poor idling or engine cutting out. Problem: If your Lupo is idling very roughly, coughing and spluttering and could also be cutting out when you are driving, the most likely cause is faulty spark plug leads. This is usually the problem if the engine management warning light isn’t on.
Why does my Volkswagon idle at 500 rpm?
As the start was too short and the engine was too low, the idle speed stays at around 500 rpm (approx. 50°C coolant temperature). Switch off the engine and immediately turn it back on. To stop this happening again, the starter motor must keep going for at least a couple of seconds.