What kind of AC compressor does a VW Jetta have?
Including and models including VW Jetta TDI MK5 and MK6, VW GTI MK5 and MK6, Beetle, Passat B6 and B7, Rabbit MK5, Golf MK6, A3 and TT with Sanden PXE16 or PXE14 AC compressor 2 Year Warranty.
Can you replace the solenoid valve on a VW Jetta?
Compatible Replacement AC Compressor Control Solenoid Valve for Sanden PXE16 and PXE14 compressor models (common part number 1K0820803E). This control valve regulates your AC compressor. Don’t buy a new AC compressor when only the valve fails. Replace the control valve on your VW Jetta with our replacement valve and save hundreds!
When do you turn on the a / C on a VW?
When the A/C is switched on and the blower motor is running at any speed, verify that 12 volts from the A/C switch in the instrument panel is available to pin T14/8 (blue/red). Note: The cooling fans should run at low speed whenever the A/C is switched on.
What are the symptoms of a failing AC compressor?
Symptoms of a failing factory AC Compressor Control Solenoid Valve including AC that does not blow cold. The problem may exist all the time or intermittently. This is a common failure on Volkswagen Jetta and other models. By just replacing the control solenoid valve you save BIG on both parts and labor.
Where is the control valve on an AC compressor?
This Control Valve is located on the front of the AC compressor and is secured to the compressor with a snap ring. Often times the factory valve fails and can easily be replaced rather than replacing the entire AC compressor.
How do you remove a VW Compressor plug?
The VW plugs can be a bear to remove sometimes. Push it on hard, very hard, and wiggle it a half dozen times. Push it on very hard, then squeeze the tab in and pull back on the tab first, then the whole connector. Keep after it and it will come off.