Can you switch radiator fans?
Generally, you can use static pressure fans any where in the case but people tend to prefer using them only on radiators. Yes, you can use one 140mm led fan at the front pushing fresh air inside. one 120mm fan on the bottom pushing fresh air inside.
Are case fans and radiator fans different?
There are two main stats for a fan. There’s the CFM (cubic feet per minute) rating, which describes how good it is at moving air when there isn’t any obstruction. On a radiator, you need high static pressure, and for case fans, you want high CFM.
How do you add a switch to a radiator fan?
The first step in adding a switch to a radiator fan is to disconnect the battery’s negative terminal. Now find the wire that is connected to the motor of the electric fan. With the help of a wire cutter, cut the wire at a distance of twelve inches from the start point.
Is there a way to manually turn on the cooling fan?
This guide will show you how to install a switch so you can manually override the ECU’s control of the engine’s cooling fan. This can be useful in several cases. Firstly, the ECU will not turn on the fan itself until the engine is quite a bit over the normal operating temperature.
How do you connect a fan wire to a switch?
Connect the fan wire to two diagonal connectors of switch (on right side at top and left side at bottom). Connect the other wire coming from original cut to one of the center terminals of switch. Connect the new fused wire to other center terminal.
How do you put a toggle switch on a radiator?
Take two red AWG wire and strip the ends and slide them on the power wire connectors of the radiator fan. Slide heat shrink over them and use the heat gun over the heat shrinks. Use a power drill to make holes at a location that you think is suitable for the switch. Now manually screw in a toggle switch.