How do you reset the tire pressure light on a VW Tiguan?

How do you reset the tire pressure light on a VW Tiguan?

To reset the benchmark tire pressures used by the TPMS to the current pressure in the tires:

  1. Switch on the ignition.
  2. Press the CAR button on the infotainment system.
  3. Select Setup.
  4. Then select Tires.
  5. In the Tire Pressure Monitoring System menu, touch the SET button.
  6. A confirmation pop-up will appear.

How do I reset my VW tire pressure monitoring system?

Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Check your user’s manual if you’re having trouble locating it.

How do I reset the tire pressure on my Tiguan?

To reset the benchmark tire pressures used by the TPMS to the current pressure in the tires: Switch on the ignition. Press the CAR button on the infotainment system. Select Setup. Then select Tires. In the Tire Pressure Monitoring System menu, touch the SET button.

How to reset the tire pressure monitoring system light?

Reset TPMS VW Warning Light Volkswagen Golf , Jetta, Passat, Phaeton, GTI, Tiguan, Tuareg 2013, 2014, 2015, 2016. Inflate all tires to pressure indicated on tire placard. Turn ignition to ON position (engine off). Press the MENU button located on instrument cluster. Use thumbnail knob to select TIRE PRESSURE.

What should I do if my tire pressure is not reset?

Some vehicles, like the Toyota Prius, for example, feature a leeway of three pounds or so for tire pressure. If the reset button doesn’t work, try inflating each tire to its proper PSI plus three, then deflate all of the tires to near zero.

How to set the tire pressure on a Volkswagen?

Press the MENU button located on instrument cluster. Use thumbnail knob to select TIRE PRESSURE. Press thumbnail knob to select. Use thumbnail knob to select STORE. Press thumbnail knob to select. Inflate all tires to pressure indicated on tire placard. Press the SET button, located in the glove box, for a minimum of two seconds.