Why does my new clutch feel loose?
If your clutch pedal feels loose or spongey, then check the release bearing or clutch fork for damage. Frequently we find failure in the pressure-plate diaphragm spring in mechanical units. If you have a hydraulic clutch release mechanism, check for: Air in the hydraulic system.
Do I need to run in a new clutch?
Break-in of a clutch is like break-in for new brake pads and disks. The clutch parts have to fit together and this takes some wear and time to do properly. Obviously you don’t need to break in the parts; however, the clutch is likely to perform better and last longer if correctly broken it.
Why does my clutch pedal feel soft after replacing a slave cylinder?
Replacing the slave cylinder allows air to enter the systems, which then needs to be bled to remove the air. If all the air isn’t removed the pedal will feel softer, though the clutch might still work. The mechanic should bleed the system again, possibly using a vacuum bleeder to help insure all the air is removed.
Is the clutch pedal aftermarket or aftermarket?
When I got it back the clutch pedal feels very soft and goes to the floor with ease, whereas before it was a lot harder and felt good. It works good and dosen’t slip but just a soft pedal. I also went for the OEM replacement and not aftermarket. Some of the google searches I’ve read say the pedal will get harder after about 1000-2000 km.
What should I do if my Clutch doesn’t work?
If all the air isn’t removed the pedal will feel softer, though the clutch might still work. The mechanic should bleed the system again, possibly using a vacuum bleeder to help insure all the air is removed. Becoming softer or harder usually happens on pedal after the slave cylinder repair or replaced.
What should I do if my clutch pedal is depressed?
As long as it works ok, not slipping, no weird noises, easy enough to shift gear to gear when the clutch pedal is depressed, me, I’d just monitor the situation for a while. This could be normal.