How do you reset the TYRE pressure on a VW Touareg?
Here’s how to do it:
- Stop the vehicle and turn off the engine.
- Adjust the cold tire pressure in all four tires recommended on the tire placard on the door panel.
- Switch on the ignition without starting the engine.
- From the main menu select the VEHICLE menu.
- Select the vehicle SETTINGS or SETUP.
- Select TYRES.
- Select SET.
What is the TYRE pressure for a VW Touareg?
This tyre placard recommends a minimum tyre pressure of 33psi for the 2017 Volkswagen Touareg Adventure. This is equal to 230kPa and 2.3 bar.
What does it mean when your tire pressure sensor says fault?
The “Tire Pressure Sensor Fault” message means that there is an issue with one or more of your tire pressure sensors. The error code may tell you that the tires’ air pressure is too low or too high or that one of the tire pressure sensors is defective.
When to reset tire pressure with TPM system?
CAUTION: DO NOT reset TPM system until all problems are fixed and tire pressure in all tires (including spare tire) has been adjusted. If reset procedure is done when tire pressures are incorrect, TPM system will not work properly and may not set an alert when a tire pressure is low or high.
What does it mean when your tire pressure is too high?
If the tire pressure is too high or too low or the control unit cannot communicate with your sensors, the message “Tire Pressure Sensor Fault” appears on your dashboard. Other cars have no sensors in their tires, and they use the ABS sensors to calculate your wheel rotation.
When to reset tire pressure sensor in Volkswagen?
1. Read out tire pressure sensor IDs before installation. 2. Switch TPMS to wheel set 2. 3. Enter needed specified tire pressures and sensor IDs into system. NOTE: Whenever a wheel is changed or replaced, or whenever vehicle has been loaded, the TPM system needs to be reset.