How do you unlock a Zanussi washing machine door?
This would depend on the water level within the drum. Pause the cycle and wait for 2-3 minutes. If the door does not unlock then the cycle should be cancelled and a spin/drain cycle selected. Once the appliance has drained the water in the drum and finished the cycle, the door will open with 2-3 minutes.
How do you reset a Zanussi washing machine?
Resetting guide:
- Start by closing the door and setting the cycle selector to zero.
- Press the two buttons at the top (soak and pre-wash).
- At the same time, turn the cycle selector counter-clockwise to the delicate spin cycle.
Why won’t my Zanussi washing machine door open?
On some models, if there is a problem with opening the door and the display is off, turn on the washing machine and make sure the door lock icon is not active. 3. Check if there is water in the machine. If there is water in the machine, the door cannot be opened.
How do I find my Zanussi error code?
Error codes on Zanussi washing machines will be displayed in two different ways. If your machine has an LCD display you’ll see the letter E (E is for Error) followed by two numbers. If your machine has no LCD display however, combinations of LEDs on your machine will flash.
How do you fix a washing machine door that won’t close?
The washing machine door won’t close or block Other malfunctions may be eliminated using this tips. Adjust the position of the glass hatch using special bolt claps to avoid possible skews. Remove and disassemble the door in order to adjust the steel pin of the locking shoe. washing program.
How do you bypass a lid lock?
Put the lid back down and plug the washing machine back into the electrical outlet. Turn on the appliance and lift the lid. If the appliance keeps running, the magnet is in the proper location. If the appliance turns off, you’ll have to lift the lid again and reposition the magnet.
What is the fault code on a Zanussi washing machine?
Zanussi washing machine fault codes are shown in one of two ways. In machines with an LED display, you’ll see an E followed by two numbers. If your machine doesn’t have a display panel the fault code is shown using a combination of red and green flashes on the start/stop light.
How do you take child lock off Zanussi washing machine?
Zanussi Jet System. To get the child lock off you need to press and hold the 2 buttons above the picture of the pad lock. So press and hold them in for several seconds and it will then take the child lock off.
What does E4 mean on a Zanussi washing machine?
If the error code on your machine begins E4* it indicates a problem with the door lock. You’ll need to check the door lock itself and the wiring and connections between the door lock and the main control board to get to the bottom of this series of faults.
How does the door lock on a washing machine work?
The locking of the door. Washing machines have a bi-metal strip inside the door lock which is heated by PTC Heater (resister) when live and neutral are activated on to the pcts it heats up and bends the bi-metal strip which then moves the arm to activate the common terminal and push a pin into the closed door to lock it in place.