How do you take apart a Medeco lock?

How do you take apart a Medeco lock?

Remove single deadbolts by looking for a hole or depression on the interior side of the door. Insert a pin or screwdriver into the hole, depending on the size. This will release the thumbturn and surrounding trim. Once you remove the trim, use a screwdriver to remove the screws holding the lock in place.

How do you take apart a house lock?

1. Step 1: Locate & Unscrew the Set Screw. This screw will be on the shank of the inside knob (the one you use to lock the door).
2. Step 2: Unscrew the Door Handles.
3. Step 3: Remove the Rose Plates.
4. Step 4: Remove the Face Plate.
5. Step 5: Remove the Mortise Lock.

How do I get rid of multi lock?

How to uninstall MUL-T-LOCK Hercular Deadbolt

1. Remove thumb turn using 1/16″ hex key.
2. Gently pry off the cylinder face cover with ice pick or needle.
3. Remove two machine screws using 3/16″ hex key.
4. Remaning part can be removed from a door using #2 Phillips screwdriver.

How do you fix a lock cylinder?

How to Fix a Loose Door Lock Cylinder

1. Remove the Lock Faceplate. To fix the loose door lock cylinder, you need access to the set screws holding the cylinder in the lock.
2. Disassemble the Lock to View the Placement of the Screws.
3. Tighten the Set Screws.

How do you remove a deadbolt that is stuck in a lock?

How to Fix a Deadbolt Stuck in the Locked Position

1. Step 1A: Use a Graphite Spray to Loosen Up the Lock.
2. Step 1B: Use a Liquid Lubricant Only in Emergency Situations.
3. Step 2: Tap the Components of the Deadbolt Back into Place.
4. Step 3: Remove the Deadbolt.
5. Step 4: Return the Deadbolt to Its Proper Working Position.

Which is better Medeco vs Mul-T-Lock?

Now, Medeco gives you control over duplication, but Mul-T-Lock goes a step further and makes it more rigorous to get a key duplicated. You have the highest level of key control. Hence, if you are looking for strict key duplication controls, go for Mul-T-Lock.

What’s the best way to remove a Medeco door lock?

Use a key to remove double deadbolts. From the interior side of the door, insert your key into the lock and turn it one-quarter turn. Keeping the key in this position, insert a pin or screwdriver into the hole or depression at the base of the lock.

Can a Medeco cylinder be damaged by other lubricant?

Medeco is not responsible for lock damage caused by by other lubricant, accident, theft, misuse, abuse, or from abnormal use or conditions. Prior to lubrication, locks that are dirty or oily should be cleaned with a quality electrical contact cleaner, while locks that are extremely dirty or oily may have to be completely disassembled.

Can a locksmith disassemble a Medeco cylinder?

It is therefore recommended that only Medeco Factory Certified Locksmiths disassemble Medeco cylinders. Shake can well and with opening on white nozzle pointing away from face, insert the red plastic spray tube into the end of the white nozzle.

Is there a double deadbolt on a Medeco door?

Examine your deadbolt. If it has a thumbturn on the interior side, you have a single deadbolt. If it has a keyhole on the interior instead of a thumbturn, you have a double deadbolt.