Why does a car go into shift lock?
The shift lock release is generally a button that is built onto the lever. It allows the driver to lock the gear lever into a particular option. For example, when the driver parks the car, he/she can switch the lever into the parking option and lock it there. The lever cannot be moved until the shift lock is released.
What happens when you press the Shift key 5 times?
By Pressing the SHIFT key five times Clicking Yes will enable Sticky Keys.
How do you release the shift lock on a car?
Now, pull the key out of the ignition. Take a flat-head screwdriver or something that can do the similar job. Try to bring the cap off of the gear shift lock cover. It will be to the upper right of the gear selector. One you have removed the cover, insert the key into this slot. Now push the key down gently.
What happens if you can’t get the key out of the ignition?
Warning. If the cable is too damaged to be shifted into park by using the above steps or the transmission is badly damaged, the car may need to be towed or driven to a local repair shop. Since you will not be able to get the key out of the ignition because it won’t shift into park, a repair shop will be able to safely disengage…
What should I do if my car key won’t come out?
Any car key in an ignition should easily slide out after you have completely rotated it counterclockwise and (if applicable) pushed the key release button. If the key won’t come out of the ignition, then you need to understand the possible cause of this problem. There are a variety of reasons as to why your car key won’t come out.
How do you remove the ignition key from a Jeep Liberty?
Turn the ignition switch to the run position and depress the tab below the key lock cylinder, while holding the tab pull the key and cylinder out of the column. Now the shift interlock cable can be removed. Reverse the procedure outlined for re-installing the new parts. Also see our repair blog on Jeep Liberty rear power window replacement.