Can strut bearings be replaced?
Because the strut bearing is an integral part of your car’s front suspension, and replacing it involves a significant amount of labor, most mechanics will recommend replacing the strut bearing and the strut itself at the same time.
Can you lubricate a strut bearing?
yes you can lubricate the strut bearing from the top. you lift the little rubber gasket with a small thin screwdriver and you can fit the straw in there from an aerosol can of lithium grease, do it in three or four different places.
How long do strut bearings last?
How Long Do Strut Mounts Last? A correctly installed strut should last at least ten years, depending on where you live.
Where are the upper strut bearing located on a Volvo?
Upper strut bearing Found usually only in the front strut mount assembly, this part is essential for steering performance. It gives the assembly the flexibility it needs in order to move with the movement of the vehicle. This part often takes the brunt of force while turning your vehicle.
How do you replace a strut on a Volvo 940?
Take your impact wrench and a 24mm socket to remove the top nut. Never stand above the strut while removing this nut in case you didn’t properly tighten the spring compressor and there’s a bit of energy still allowed to be released by the spring. Stand to the side, and remove the nut, followed by the strut mount.
What kind of wrench do you need to replace a strut on a Volvo?
You could potentially use a 24mm box wrench with an angled neck and hold the strut tube from above with a 10mm wrench. Additionally, if you’re willing, you can use a pipe wrench and hold the very top of your strut tube under the strut mount, where it will not enter the strut body, undoing the top nut with a socket.
What causes upper strut mount failure in Volvo?
One common issue that Volvo drivers experience is upper front strut mount failure. If you’re not sure what we’re referring to, you’re not alone – most drivers aren’t familiar with common automotive nomenclature, which is precisely the aim of this blog.