Is it hard to change a power steering pump?
The pump replacement is easy to do once a few tricks are recognized. For example, do not attempt pump replacement without locating a power steering pump pulley puller. Using a standard pulley puller may make the pulley out of round — not a good thing!
Can I replace my power steering pump myself?
To swap out your power steering pump, you should need only basic hand tools. However, some special flare-nut wrenches and a special tool to safely remove the pulley from the pulley shaft will make the job easier. These usually can be rented–even borrowed–from the auto parts store that sells you the replacement pump.
What are the symptoms of a bad power steering pump?
Stiff steering in cold weather or while turning at low speeds is a symptom of a bad power-steering pump. Erratic functioning, such as a bit of slippage while turning the wheel, can indicate a bad power-steering pump.
What causes power steering pump to go bad?
Since your power steering pump is a simple machine, the most common cause of failure for a power steering pump is the bearing going bad. The bearing supports the shaft that connects the pulley outside the pump to the impeller inside the pump. After miles of use, it is not unusual for these bearings to wear out.
How do I replace the power steering pump?
Here’s how to replace a power steering pump. Shut off the engine and let it cool off. Locate and identify the power steering pump. Remove the power-steering belt from the pump. Place a pan under the pump and drain the power-steering fluid from the pump by disconnecting the feed and return lines.
What are the symptoms of a bad electric power steering?
Stiff Steering Wheel. The most common symptom to watch out for in any power steering system is a stiff steering wheel.