What to do when power sliding door does not work?
Reset the power sliding door function by detaching and reinstalling battery or fuse. Check for the wire connection, and inspect in accordance with the DTC procedure. When the power sliding door does not open or close automatically The vehicle is not in “P” or in a wrong switch condition.
Why is my sliding door not opening in the winter?
Older locks can rust or seize when not in use, preventing the key from releasing the lock. Penetrating oil is available from most hardware stores. Ensure that the door is free of ice and snow. Sliding doors and windows are easily frozen shut during the cold winter months and can be extremely difficult to open.
How to stop power sliding doors on Honda Odyssey?
Make sure main switch for doors is in OFF positon and make sure the ignition swithc is in LOCK “0” position. (3) Manually open the sliding doors fully. (Both) (4) Turn on the ignition switch to ON “II” position while leaving both doors fully open. (5) Turn on the main switch for power sliding doors on the dash board.
Why is my Kia Sedona sliding door not working?
When the car is parked and the ignition is turned off, there might be delay after outer handle is pulled before the power operation. This is due to a required period as PSDM is prepared before the power open operation, checking for normal operation which is not a problem. 8. The operation of sliding doors may differ.
What to do when power sliding doors stop working?
1 (1) Make sure main switch for doors is in OFF position. 2 (2) Install all fuses in to original location. 3 (3) Manually open the sliding doors fully. 4 (4) Turn on the ignition switch to ON “II” position while leaving both doors fully open. 5 (5) Turn on the main switch for power sliding doors on the dash board.
Make sure main switch for doors is in OFF positon and make sure the ignition swithc is in LOCK “0” position. (3) Manually open the sliding doors fully. (Both) (4) Turn on the ignition switch to ON “II” position while leaving both doors fully open. (5) Turn on the main switch for power sliding doors on the dash board.
Where is the power sliding door switch located?
This switch is located to the left of the steering wheel. It’s labeled “Main.” Press and hold both power sliding door buttons until the doors close completely. If this does not work, turn the “Main” switch to “Off” and manually close the doors.
When the car is parked and the ignition is turned off, there might be delay after outer handle is pulled before the power operation. This is due to a required period as PSDM is prepared before the power open operation, checking for normal operation which is not a problem. 8. The operation of sliding doors may differ.