How do you bleed the clutch on a 2002 Honda Civic?
For bleeding the clutch, loosen the bleeder valve on the slave cylinder, which is on the front of the tranny. Be careful with it as they break easy. Get a hose, and a cup of brake fluid. Dip the hose in the cup and put it over the bleeder valve on the slave cylinder.
How to bleed the clutch on a master cylinder?
Bleeding Your Clutch Check the fluid level in the master cylinder. Locate the bleed screw on the slave cylinder. Attach the hose to the bleed screw. Open the bleed screw on the slave cylinder. Have a friend press the clutch pedal in and hold it. Close the bleed screw. Have your friend release the clutch pedal.
When do you close the bleeder valve on a clutch?
Close the bleeder valve when you see no more air bubbles in the fluid; release the clutch pedal as well. You would need to have another person as this operation can’t be done alone. Finally, it is time to test the clutch once the slave cylinder has been bled.
How do you test a Bleeder on a clutch?
Use the vacuum pump and open the bladder to suck out the air bubbles from the slave cylinder. Also, do keep an eye on the fluid level while sucking out the air. When the air bubbles stop coming, you can close the bleeder valve. At last, you can test the clutch as everything should be working now.
How do you Bleed a slave cylinder in a car?
If you have difficulty locating the slave cylinder or bleed screw, refer to the service manual for your vehicle. Attach the hose to the bleed screw. Press a clear hose onto the slave cylinder bleed screw and place the other end in an empty soda bottle.
What happens when you bleed the slave cylinder on a clutch?
As more air is bled out and hydraulic pressure builds, the clutch pedal will come up on its own. Warning: While bleeding the slave cylinder, never let the fluid level in the clutch master cylinder get too low or you will suck air into the hydraulic system and the process will have to be started over.
Where is the bleeding valve on a clutch?
Pour the fluid into the clutch master cylinder. Locate the slave cylinder – On most vehicles, it will be bolted externally on the transmission. In others the slave cylinder is inside the transmission but the bleeding valve can be easily accessed on the outside.
What should I do if I Bleed my Clutch?
Use a hand-operated vacuum pump to bleed a clutch. If you feel a change in the way the clutch pedal feels when stepping on it, or if the clutch pedal stays down, or if you find leaked brake fluid inside your car, you should have a mechanic inspect the clutch master cylinder and replace it if needed.
How do you bleed air from a slave cylinder?
Adding the new parts introduces air into the system, which creates a soft or non-existent clutch action when you press the pedal. To bleed air from the hydraulic clutch system, you must release air from the slave cylinder.