What should I remove from my Volvo 960?
Remove top nut from both left and right engine mounts. Remove air mass meter and intake hose. Disconnect and remove large and small crankcase ventilation hoses, idling hose and idling valve lead. Remove 2 EVAP valve hoses at intake manifold. Remove air mass meter connector, air preheater hose and throttle pulley cover.
Where to find engine number on Volvo 960?
The sixth and seventh character identifies engine model. Engine identification number, located on left side of cylinder block below cylinder head, may be required when ordering replacement parts. Engine Type Code 2.9L (960) ………….
Is the b6304s 98 engine a hydraulic lifter?
B6304S 98 Engine is equipped with hydraulic lifters. No valve adjustment is necessary. NOTE: For reassembly reference, label all electrical connectors, vacuum hoses and fuel lines before removal. Also place mating marks on other major assemblies before removal. Hood removal is not necessary, as hood opens to horizontal position.
How to replace the unit injector sleeve on a Volvo?
1 Lubricate 88880057 Thread tap (M9) with grease in order to prevent swarf from falling into the cylinder. Screw the thread tap at least 5 mm into the copper sleeve, using 9998252 Thread cutting tool. 2 Remove tool 9998252 Thread cutting tool and 88880057 Thread tap.
Is the Volvo 960 big and it is clever?
“It is big and it is clever.” The 960 is the big daddy of the Volvo range. It offered unparalleled practical space and performance and has quite an avid following among our forum members. We get asked quite a bit about making these more economical but this is a performance tuning article so we’ll leave that discussion for our forum.
What causes sudden idle surge on Volvo 960?
960 Sudden Idle Surge: ECT Sensor Failure Changing Engine Mounts on 960/90 960 Engine Swap Transmission Problems: 960 Automatic Transmission Questions 960 Won’t Restart: PNP or Harness 960 Flashing Transmission Lights Other Concerns: