How do I reset my Volvo SRS?
How to Reset / Diagnose Volvo Airbag Light
- Locate the OBD-II port under the dashboard.
- Turn on the ignition but do not start the engine.
- Select Volvo and the correct model from the menu.
- Select Control Units, then scroll to SRS Control Unit.
- Next select Read Codes.
What is an SRS fault?
“SRS” stands for Supplemental Restraint System. It has to do with your safety restraints, which include your airbags and seatbelts. Keeping these in good repair can keep your safe in an accident. So if your SRS light comes on, come in to our European auto repair center right away to have it evaluated.
Why do I get an error message on my Volvo?
This common error message tends to be found most commonly on the P2 platform vehicles ranging from model years 2005-2010. The most common cause for this message is due to a faulty steering angle sensor.
How to reset SRS airbag service urgent proced-Fixya?
1. Turn ignition switch from OFF to ON. 2. Air Bag warning light is on for 7 seconds and turns off, turn the ignition switch OFF within 1 second after the light goes out. 3. After ignition switch is turned OFF, wait for more than 3 seconds. 4. Repeat steps 1 to 3 twice. (Perform 3 times in total.) 5. Turn Ignition switch ON. 6.
How do you reset the SRS warning light?
Air Bag warning light is on for 7 seconds and turns off, turn the ignition switch OFF within 1 second after the light goes out. 3. After ignition switch is turned OFF, wait for more than 3 seconds. 4. Repeat steps 1 to 3 twice. (Perform 3 times in total.) 5. Turn Ignition switch ON. 6. The SRS light should be reset.
When do I get the Volvo anti skid service message?
Chances are that many of you have received the common “Anti-Skid Service Required” message from your P2 (like the Volvo S60 ). If you haven’t, there’s a good chance that you may come across it in the future. This common error message tends to be found most commonly on the P2 platform vehicles ranging from model years 2005-2010.