Can you lock keys in Volvo xc60?
The car can be locked/unlocked using the remote control key’s buttons or keylessly with Passive Entry. With keyless locking and unlocking (Passive Entry) the key can be anywhere in the car to start the car. These keys can be linked to different driver profiles to save personal preferences in the car.
Is keyless entry standard on xc60?
The remote key is used to lock and unlock doors, the tailgate and the fuel filler door. The remote key is not physically used to start the ignition because the vehicle is standard-equipped with keyless start (Passive Start).
How do I lock my Volvo?
There are two types of keys to the car. The car can be locked/unlocked using the remote control key’s buttons or keylessly with Passive Entry. Then you only need to have the key in a pocket, for example. It is also possible to lock and unlock from the inside of the car and via the Volvo On Call app.
How do you start a Volvo xc60 with key?
Remote starting the engine To be able to remotely start the engine the car must be locked and the bonnet closed. Proceed as follows: Briefly press on the key’s button (2). Follow this immediately afterwards with a long press – at least 2 seconds – on button (3).
How do I use Volvo xc60 key?
Put the key in the lock cylinder. Turn the key clockwise 45 degrees so that the key blade is pointing straight rearward. Turn the key blade back 45 degrees to its original position. Remove the key from the lock cylinder and release the handle so that it returns to its original position against the vehicle.
Which is the top of the range Volvo XC60?
Badged as ‘Recharge’ models, there are three plug-in hybrids included on the price list – the T6 with 335bhp, the T8 producing 385bhp and the top-of-the-range T8 Polestar Engineered delivering 399bhp. Volvo has three core equipment levels for the XC60 – the entry-level Momentum is followed by R-Design and Inscription.
How do you start a Volvo XC60?
Holding the end of the remote key with the base of the key blade, insert the remote key into the ignition slot and press it in as far as possible. Press the brake pedal. Press the START/STOP ENGINEbutton briefly and release it to start the engine. 01 01 01
Where is the reset button on a Volvo XC60?
Press the RESET button on the left steering wheel lever twice briefly. Scroll to the desired trip odometer (T1 or T2) with the thumb wheel. Press and hold RESET to reset. See your owner’s Manual for information about the analog instrument panel.
What are the lights on a Volvo XC60?
1 Green light: the vehicle is locked. 2 Yellow light: the vehicle is unlocked. 3Red light: the alarm has been triggered. Alternatively flashing red lights: the alarm was triggered less than 5 minutes ago. See the additional information on the last page of this guide. How do I switch off the engine? Park the vehicle and briefly press the
How does the parking brake work on a Volvo XC60?
Press the PUSH LOCK/PULL RELEASE control: the symbol in the instrument panel flashes while the parking brake is being ap- plied and glows steadily when it has been fully applied. Release the brake pedal. Press firmly on the brake pedal. Pull the PUSH LOCK/PULL RELEASE con- trol.