What happens when you replace the timing belt?
If you try to remove and replace the timing belt with the engine in any other position, chances are good you’ll throw things out of time. Then you’ll get confused and have to pull off the valve cover as you try to determine when No. 1’s valves are closed (which begins the compression stroke) in order to re-index the engine.
Where to find the TDC mark on a timing belt?
(2b) The flywheel pulley TDC mark is accessible through a hole in the bellhousing. (2c) The camshaft TDC is easy to find — especially if you add white paint as we did. We cannot stress this enough: Be careful!
Where is the timing belt on a transverse 4 cylinder engine?
On most transverse four-cylinder engines, you’ll have to remove the passenger-side motor mount in order to gain access to the timing belt. This means the entire powertrain needs to be supported in that area while you’re working. And finally, getting to the lower portion of multipiece timing belt covers usually requires underbody access.
How long do timing belts last on econobox?
How we test gear. Timing belts last 60,000 to 100,000 miles. check your owner’s manual for the manufacturer’s replacement interval. Your six-year-old econobox is starting to show a bit of wear and tear, but everything mechanical still works fine. Until it doesn’t. Specifically, the engine suddenly goes dead silent one fine day.
Why does my car not start after replacing the timing belt?
When replacing timing belt or chain or cylinder head often the fuel injectors will need to be removed or the fuel line will need to be disconnected. As a result it will take some time to build fuel pressure. Also, check all your connections. If the car has good compression, spark, and fuel it should start.
Where are the timing marks on a timing belt?
(2a) Find the timing marks on the flywheel and cam, and set them both to TDC. (2b) The flywheel pulley TDC mark is accessible through a hole in the bellhousing. (2c) The camshaft TDC is easy to find — especially if you add white paint as we did.
How often do timing belts need to be replaced?
Timing belts last 60,000 to 100,000 miles. check your owner’s manual for the manufacturer’s replacement interval. Your six-year-old econobox is starting to show a bit of wear and tear, but everything mechanical still works fine.
Do you need to remove motor mount for timing belt?
Study the procedure before digging in, either in a service manual or on the Web. On most transverse four-cylinder engines, you’ll have to remove the passenger-side motor mount in order to gain access to the timing belt. This means the entire powertrain needs to be supported in that area while you’re working.
Why does the timing belt make a ticking sound?
When the timing belt starts to wear out, it may create a ticking sound inside the motor. This warning sign may also be an indication of low oil pressure or the engine not having the proper amount of lubrication.
How much does it cost to replace a timing belt on a Lexus?
Timing belt replacement is an interval maintenance requirement for Lexus vehicles. This repair should run you under $400 and to replace the water pump will cost between $343 and $441. Owners of Lexus ES 350 and 300h models do not have timing belts.
What causes oil to leak from the timing belt?
Another issue that will cause oil to leak is when the gasket between the engine block and timing cover wears out, is cracked or has been improperly installed and is pinched. Leaking oil from the timing belt cover commonly results in engine overheating and can prematurely wear the timing belt.
What was the trim level for the Saturn L series?
The L series had also adopted a type of a trim level structure that was similar to the trim level structure on the Saturn ION. The L300 sedan and the L300 station wagon models both used the L300.1, the L300.2, and the L300.3 for both the L300 sedan and the L300 station wagon models.
What was the name of the Saturn L in 2001?
2001: For the 2001 model year, all of the L-series sedan and station wagon models were renamed for 2001. For the sedans, the LS was renamed as the L100, the LS1 was renamed as the L200, and the LS2 was renamed as the L300. For the station wagons, the LW1 was renamed as the LW200, and the LW2 was renamed as the LW300.
What was the last year of the Saturn L300?
The L300 sedan and the L300 station wagon models both used the L300.1, the L300.2, and the L300.3 for both the L300 sedan and the L300 station wagon models. The Saturn L300 station wagon was discontinued after the 2004 model year. 2005: For the 2005 model year, the Saturn L series was now trimmed down to only one model: the L300.2 sedan.
Is there a recall on the Saturn L?
The resulting recall affected more than 300,000 vehicles in the United States and Canada. Later that same year, the North Carolina Consumers Council petitioned for an investigation into timing chain failures and subsequent engine failures across the model lineup for vehicles using the 2.2L engine.