What does code 91 mean on Intex saltwater?
1. There is dirt or deposits on the titanium plates. Solution: Remove the primary electrolytic cell for inspection. The cord of the electrolytic cell is loose. …
Why does my salt water pump keep saying low salt?
The pool pump filter is so small, that if you don’t keep it cleaned out several times a day, it clogs and seriously decreases the water flow, causing a low salt reading and low chlorine output, due to the fact that the water is not moving quickly and strong enough through the SWS.
What does 93 mean on my saltwater pump?
It is your Saltwater Chlorinator’s way of letting you know that it is working properly and your pool’s water has a level of salt that is optimal/good. Code 93 just lets you know it is not actively converting salt to chlorine…it is in ‘standby mode.
How much salt do I put in my Intex pool?
The ideal salt level in the pool water is between 2500-3500 ppm (parts per million) with 3000 ppm being optimal. A too low salt level will reduce the efficiency of the Saltwater System and result in low chlorine production.
Can you clean salt cell with vinegar?
Fill the 5 gallon bucket with water, and turn it on. You may have to stick the end of a water hose into the hose to the pump to get it going. Wait until you get water circ before adding the vinegar. Just leave it go for a couple hours finally use a plastic scraper to gently remove stubborn salt buildup in the cell.
How do you clean an Intex electrolytic cell?
To clean the cells, the manufacturer recommends removing them and either washing them off with a garden hose or placing them in a vinegar solution overnight. The recommended solution consists of 1 cup of vinegar and 2 gallons of water.
How much salt does it take to raise 1000 ppm?
If you had an 8,000 gallon pool with a current salt level of 1,000 ppm, you would need to add 147 pounds of salt.
How many bags of salt do I need for a 60000 Litre pool?
How many bags you really need?
| Raising ppm by | 10000 liters | 60000 liters |
|---|---|---|
| 2000 ppm | 1 salt bag | 5.8 salt bags |
| 3000 ppm | 1.5 salt bags | 8.6 salt bags |
| 4000 ppm | 2 salt bags | 11.5 salt bags |
| 5000 ppm | 2.4 salt bags | 14. 4 salt bags |
How do I know if my salt cell is bad?
If the salt cell bubbles, but only a little bit, then you probably have a bad cell. It is still a good idea to call a pool professional to confirm this diagnosis. If the salt cell bubbles vigorously, then it is working fine.
When should you clean a salt cell?
Every salt cell should be chemically cleaned at least once per season, usually after the pool has been closed.
- Turn off pool pump.
- Remove the salt cell from the lines/unit.
- Rinse the plates with a garden hose.
- If you have a Zodiac LM Series salt cell, pour salt cell cleaner into the cell until the plates are covered.