What is air activated switch?
A garbage disposal air switch activates your disposal by pressing a button, which sends a pulse of air through PVC tubing to a control box underneath your sink which contains an air pressure switch. The disposal air switch is compatible with most garbage disposals and installation is easy!
How does an air activated switch work?
How Does The Air Switch Work? When you press the push button initially, it triggers a pulse of air towards the power control unit. The air goes through tubing connected between the button and the control unit. Once the control unit receives the “air signal”, it turns on the power to your disposer.
What is a air switch?
As you may assume from the name, an Air Switch is a switch which is activated by air. A push button can be used to instigate a “puff” or “sip” of air which travels along a length of PVC tubing and activates the air switch. The air switch will turn a device on or off.
Are air switches good?
Air switches are a safe option. They work by sending a pulse of air through the tubing to a control box underneath your sink where there is an air pressure switch. Then, the garbage disposal can be turned on and off.
Where should I place my air switch?
We normally place it right next to the faucet itself. This eliminates an electrical switch from being placed on the wall, where it can clutter up the look of your backsplash. And it works great with island sinks.
Do all garbage disposals need a switch?
Be aware that most types of disposals require a switch adjacent to the sink to control the outlet—the electrician should wire for this, too. Note: Batch-feed disposers don’t require a switch because they start when you insert and turn a special drain plug.
How do you bypass an air switch?
It’s relatively easy to bypass the air switch. You have to find the switch (most likely under the blower cover) and either jumper between the wires on the terminals or remove them and tie them together. Keep in mind that the switch isn’t the pushbutton. The pushbutton is just the actuator of the switch.
How do you install an air switch?
How to Install an Air Switch
- Drill a hole in the counter. Determine the location that is most convenient for the switch.
- Attach Hose and Slip Air Switch into Counter. Attach the hose to the switch.
- Twist the Nut onto the Air Switch.
- Attach the Hose to the Relay and Plug Everything In.
- Stand Back and Enjoy the View.
Can you add an air switch to any garbage disposal?
Using pneumatic technology the operator does not risk electrical shock as their is no electrical current at the point of actuation. The air switch for garbage disposal easily mounts to the sink, counter top, or the wall when paired with a plate. The air switch is compatible with most garbage disposals.
Do all garbage disposals have a switch?
Most garbage disposal units require a type of switch to work. Without a switch, you cannot turn on the garbage disposal. However, batch feed disposals do not require a wall switch. When there is a clog, you will need to turn the unit off at the switch to remove any blockage manually.
Can you install a garbage disposal without a switch?
Can an electrician install a garbage disposal?
There are a wide range of prices for garbage disposals and installation. As stated previously, you made need an electrician AND a plumber, to get it installed properly. Hourly rates will have to be added to the expense of the unit, which can cost tens to hundreds of dollars.