How much does GMC Yukon StabiliTrak light cost?
Took my car to the GM service center in Victorville today and service Manager Chuck had me talk to larry that did a service report… He stated that they would have to start with the vehicle throttle body and replace it at a cost of $561.00 and see if that would fix the problem…
What’s the problem with my 2007 GMC Yukon?
No one has added a helpful site for this 2007 Yukon problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: At first the stabilitrak light came on and off a few times.
When do traction control lights come on on a GMC?
The stabilitrak and traction control lights come on and service lights for both come on at random. The usually common before I reach 20 mph, and is random. Some days it won’t some days it will. I have stopped turned the ignition off for a few minutes, and restarted and it goes away. Days later its back.
Are there any problems with the GMC StabiliTrak?
At first, the dealer said they could not duplicate the StabiliTrak problems, but after much persistence, they agreed the steering angle sensor was defective and it has been replaced. Unfortunately, the vehicle is still having problems.
Took my car to the GM service center in Victorville today and service Manager Chuck had me talk to larry that did a service report… He stated that they would have to start with the vehicle throttle body and replace it at a cost of $561.00 and see if that would fix the problem…
When do Service StabiliTrak warning lights come on?
For most truck owners, the warning lights occur frequently when the truck is idling and then disappears and reappears while driving. The “Service Stabilitrak” light will usually appear first and then the car will turn traction control off. Once traction control is turned off, the transmission beings to shift very hard and rough.
Why is my traction control not working on my Yukon?
Traction Control Not Working – Your Yukon’s traction control system mostly uses the same sensors to determine if a wheel has broken traction. Unlike StabiliTrak, which controls lateral issues (sliding), traction control keeps the wheels from unnecessary spinning.
Why does my GMC Canyon have a StabiliTrak light?
If these lights appear, it generally means these important safety features are being disabled. This issue can happen at any time with any of the GM vehicles. We are currently working on a claim involving a 2012 GMC Canyon where the StabiliTrak light has come on five times within the first 5,000 mile period.
What causes the Service StabiliTrak warning light on?
Despite the system being steering, braking, and traction related, a number of engine and other problems can cause this warning light. Overall, we have seen Service Stabilitrak caused by a handful of issues. And the correct fix here seems to vary widely by vehicle.
What’s the StabiliTrak light on a Chevy Silverado?
Mine was a chewed through wire on the #2 coil pak (the red wire), stabiltrak and traction lights, DIC indication of both off, flashing check engine light, rough idle hard 1-2 shift.Repaired the connection and all is good so far. 101 people found this helpful. Chris_Mc75 answered 3 years ago
When do traction control lights appear on a Chevy truck?
Early to mid 2000’s Chevy trucks and suburbans have a common problem with the stabilitrak and traction control service lights appearing on the dash. For most truck owners, the warning lights occur frequently when the truck is idling and then disappears and reappears while driving.
When does the ABS light come on on a GMC Yukon?
Your GMC Yukon’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Yukon does not have Anti-Lock brakes, and the safety they provide. Your Yukon’s ABS system uses a system of sensors to determine wheel speed when braking.
What does the Service StabiliTrak warning light mean?
Service StabiliTrak Warning – The number one indication that something is wrong is your Yukon’s “Service StabiliTrak” warning light itself. Cruise Control – Without the StabiliTrak system functioning properly, your Yukon may disable the cruise control.
How to fix a GMC Stabili Trak traction control?
GMC/Chevy Stabili Trak, Traction Control, and Blinking Engine light – YouTube DIY FIX! GMC/Chevy Stabili Trak, Traction Control, and Blinking Engine light
Are there any problems with GMC Yukon Denali?
Problems With the Traction Control on a 2006 Yukon. The 2006 GMC or Cadillac Yukon Denali has a recall, technical service bulletins (TSB) and safety reports about the stability control on the SUV. The stability control on the Yukon assists the driver in controlling the vehicle during skids or unstable steering conditions.
What is the stability control on a Yukon?
The stability control on the Yukon assists the driver in controlling the vehicle during skids or unstable steering conditions. The problems with the stability control in the Yukon prevents the operator from having this assistance.
Why is my GMC Yukon hard to steer?
Once this incorrect information is sent to the Yukon’s computer and the stability control attempts to correct the steering control of the SUV, the Yukon driver will find the GMC hard to steer. The tire pressure regulator must be replaced in order to correct this stability control problem.
The stabilitrak and traction control lights come on and service lights for both come on at random. The usually common before I reach 20 mph, and is random. Some days it won’t some days it will. I have stopped turned the ignition off for a few minutes, and restarted and it goes away. Days later its back.
How often does the StabiliTrak light come on?
We are currently working on a claim involving a 2012 GMC Canyon where the StabiliTrak light has come on five times within the first 5,000 mile period. At first, the dealer said they could not duplicate the StabiliTrak problems, but after much persistence, they agreed the steering angle sensor was defective and it has been replaced.
What does reduced engine power, service Stabilitrak, traction control?
Reduced engine power, service stabilitrak, service traction control. Reduced engine power, stabilitrak service, and traction control service showed up on my informations center. Cleaned the throttle body, checked throttle body wiring harness and other wires, checked the gas pedal connection, and detached the battery.
What does Service StabiliTrak do on a GM Truck?
Both times the initial indication of “Stabiltrak disabled” came on, followed by “Service Stabilitrak” followed by “Service Traction Control” lastly followed by “Reduce Engine Power” and eventually the engine stalled out leaving me with only manual steering and brakes. Has anyone had this issue before?
What happens when you reduce engine power on a GMC Yukon?
When the engine power has been reduced, the engine and transmission can operate in totally different ways. This leads to jerky shifts, unstable acceleration, and horrible gas mileage. Good luck diagnosing your Yukon’s reduced engine power light. If there is anything that you would like to add, please feel free to leave a comment below.
How does the GMC Yukon Stabilitrak system work?
StabiliTrak is a GM specific vehicle stability system. It works by using a complex system of sensors to detect whether or not the vehicle is properly responding to your input in emergency situations. It uses this data to apply a specific brake or reduce the engine power to correct the slide and get your Yukon pointed back in the right direction.
Reduced engine power, service stabilitrak, service traction control. Reduced engine power, stabilitrak service, and traction control service showed up on my informations center. Cleaned the throttle body, checked throttle body wiring harness and other wires, checked the gas pedal connection, and detached the battery.
When the engine power has been reduced, the engine and transmission can operate in totally different ways. This leads to jerky shifts, unstable acceleration, and horrible gas mileage. Good luck diagnosing your Yukon’s reduced engine power light. If there is anything that you would like to add, please feel free to leave a comment below.
For most truck owners, the warning lights occur frequently when the truck is idling and then disappears and reappears while driving. The “Service Stabilitrak” light will usually appear first and then the car will turn traction control off. Once traction control is turned off, the transmission beings to shift very hard and rough.
What causes a GMC Yukon to lose its Stabilitrak system?
There are many things that can cause the StabiliTrak system to lose its ability to function. It is a complex system. Wheel Speed Sensor – If one of the wheel speed sensors is out, your Yukon will no longer be able to tell if all of the wheels are turning at the same speed.
When does traction control turn off Service StabiliTrak?
The “Service Stabilitrak” light will usually appear first and then the car will turn traction control off. Once traction control is turned off, the transmission beings to shift very hard and rough.
There are many things that can cause the StabiliTrak system to lose its ability to function. It is a complex system. Wheel Speed Sensor – If one of the wheel speed sensors is out, your Yukon will no longer be able to tell if all of the wheels are turning at the same speed.
The “Service Stabilitrak” light will usually appear first and then the car will turn traction control off. Once traction control is turned off, the transmission beings to shift very hard and rough.
If these lights appear, it generally means these important safety features are being disabled. This issue can happen at any time with any of the GM vehicles. We are currently working on a claim involving a 2012 GMC Canyon where the StabiliTrak light has come on five times within the first 5,000 mile period.
Can a GMC Yukon have a suspension problem?
As it turns out, GMC Yukon suspension issues are a common problem for owners. Even if you haven’t yet had problems with yours, it’s worth looking for the warning signs. The Yukon is outfitted with a suspension warning system.
At first, the dealer said they could not duplicate the StabiliTrak problems, but after much persistence, they agreed the steering angle sensor was defective and it has been replaced. Unfortunately, the vehicle is still having problems.
What does TSBs stand for in GMC Yukon?
Technical Service Bulletins, or TSBs for short, are notifications made directly by GMC to help automotive technicians diagnose and repair commonly reported Yukon problems. Interested in how this information is collected?