What should fuel pressure be on a Cummins ISM?
Click to expand… I’d check for air in the fuel. Run site glass and see what ya got. Pressures are very low. Sposed to be 90PSI cranking, 155PSI at 1600RPM. I have a vacuum gauge I put in the suction side of the fuel system at the pump.
Is the Cummins ISM no start or no smoke?
I have a customers 2000 International 9100i with a Cummins ISM. It quit running down the highway. Cranks but no start/ no smoke.
Can a Cummins ISM be used in a daycab?
The Cummins ISM is the alternative engine to the larger ISX for local and long haul applications. Although mostly seen in daycab tractors and vocational trucks, the ISM engine can also be found in large motorhomes and fire equipment. In 2002, upgraded to the CM875 fuel system which included an EGR valve for EPA emmission…
Is the ISM on a Cummins Shaker good?
Throttle will cut out motor falls to idle stop engine light 10sec latter everything comes back no codes,days will go by no problem then every turn act up. Short period drove a 03′ Shaker with the ISM it was good all around 7+/8.5mpg loaded/empty.good luck
Where can I find a Cummins ISM engine?
The Cummins ISM is the alternative engine to the larger ISX for local and long haul applications. Although mostly seen in daycab tractors and vocational trucks, the ISM engine can also be found in large motorhomes and fire equipment.
Is there a power balance code on Cummins Insite?
Using Cummins Insite it has no codes except power balance code from #3 that has had a misfire for a couple weeks and they refuse to give me time to diagnose, power at the fuel solenoid, 25 psi fuel pressure cranking, it will fire on ether.
What does it mean when a Cummins ISM surges?
Surges thru all gears. As it starts to pull then power seems to be halted but the turbo continues to spool. It will do this continuously thru the entire gear up down up down. If i shift while acting normal it shifts normal. If i do it while its acting up it will sort of sneeze access boost. When ever it surges it puffs black smoke