Is there a Skyjack sjiii 3219 scissor lift that works?
Discussion in ‘ Forklifts/Telehandlers ‘ started by jpmtnman, Jun 19, 2014 . Help!! We have a Skyjack SJIII 3219 scissor lift (Shipped 08/06) that I need help with troubleshooting. After the lift sits overnight I go to drive or raise the platform and the lift will work fine for a couple minutes and then I start having problems.
Why does my Skyjack controller keep going over center?
The new joystick solved the problem. of coarse, make sure those goofy skyjack plugs are clean and tight, and the harness is not compromised. They always get abuse at the plug. The controller may have a potentiometer on it and I may be going over center.
How can I Check my Skyjack scissor lift?
Check the battery connections and connect a voltmeter to measure system voltage. Should read better than 24 volts at rest, and should hold pretty close to that with fully charged batteries. If you get a large drop check each battery the same way until you find the culprit. Click to expand…
What are the dangers of using a Skyjack?
1-18. Electrocution Hazard This aerial platform is not electrically insulated. Maintain a minimum safe approach distance (MSAD) from energized power lines and parts as listed below. Operator must allowfor platform sway, rock or sag. This aerial platform does not provide protection from contact with or proximity to an electrically charged conductor.
When to not as Cend or descend Skyjack?
•DO NOTAscend or descend a grade steeper than 23% (3215, 3219), or 25% (3220, 3226, 4620, 4626, 4632, 6826 & 6832). As- cend or descend grades only when fully lowered and then only to the maximums noted above. Warning
What’s the best way to operate a Skyjack?
• Operate all controls smoothly. •Warn other people that you are there by means of flashing lights, sign and cones. • MAKE SAFETY YOUR No.1 PRIORITY. NEVER Use an unsafe machine. • Use an access platform to hoist loads like a crane. • Overload cage/platform. • Operate in strong winds (Check manufacturer’s recommendation).
How does the JLG boom lift drive orientation system work?
The drive orientation system activates whenever the boom is swung past the rear drive wheels from the normal driving position. When drive is initiated past the rear drive wheels, the drive orientation indicator will flash and the steer and drive functions will be disabled.
What causes liftgate to lower slower than normal?
Platform lowers extremely slowly. Platform will not raise to full raised position. Platform lowers in a jerky fashion. Platform runner hangs up on one side when lowering. Broken lift chain. Broken platform assist spring. Platform lowers slower than normal. Platform closes and/or opens too slow.
When to use ground lift or lower switch?
If the ground lift/lower switch works and raises it past the 4ft mark then concentrate your attention to the cable in the scissor assy and control box in the platform control.
What kind of power does a Skyjack sjiii have?
Showing items 1 – 2 of 2 results. Checked switch and emergency shut off and they have no power, but function properly. Main shutoff has full power and works good and power to motor solenoid, but no control power to active. Manual jumping causes motor to work fine.
How tall is a Skyjack scissor lift in feet?
Reconditioned by Skyjack factory trained techs2015 COREwww.usedscissorlift.comMajor Componets=NEW*WARRANTY*Inexpensive delivery anywhere!Not what you’… 2015 SKYJACK SJIII 3219, Electric Scissor Lift Make: SKYJACK Model: SJIII 3219, Year: 2015, Hours :45 Max Working Height: 26′ ft. , Max Platform…
Where can I find Skyjack equipment for sale?
Reconditioned by Skyjack Factory Trained Techs!2015 CoreMajor Componets=NEWWarrantyCAN DELIVER ANYWHERE!www.usedscissorlift.comNot what you’re looking… 2016 CORE 2021 Reconditioned by Skyjack Factory Trained Techs Maor Components =NEW Warranty CAN SHIP www.usedscissorlift.com…