Is there a wire diagram for a 2005 Peterbilt 387?
I have found the wire diagram for a 2005 Peterbilt 387. In PDF format. About time. That would be a great thing to have !!!!! Any links or something ? so I was driving everything was great temperatures were fine all of a sudden I lose all electrical power the only thing that was still working was the four ways.
When is the latest version of Peterbilt coming out?
In the interest of continuing product development, Peterbilt reserves the right to change specifications or products at any time without prior notice. It is the responsibility of the user to ensure that he is working with the latest released information. Check Peterbilt.com for the latest released version.
Is there a charge for Peterbilt starter service?
There is no charge for this service, but standard message and data rates may apply. Check where the + battery cables join together on the starter for good connection.Also check where the – cables join together on the engine block or starter.
What are the safety requirements for a Peterbilt?
FEDERAL MOTOR VEHICLE SAFETY STANDARDS AND COMPLIANCE 2-2 NOISE AND EMISSIONS REQUIREMENTS 2-3 FUEL SYSTEM 2-4 COMPRESSED AIR SYSTEM 2-4 EXHAUST AND EXHAUST AFTER-TREATMENT SYSTEM 2-5 COOLING SYSTEM 2-6 AIR INTAKE SYSTEM 2-6 CHARGE AIR COOLER SYSTEM 2-6 ELECTRICAL SYSTEM 2-7
How much does a Peterbilt 387 truck cost?
2007 PETERBILT 387 Conventional Trucks w/ Sleeper For Sale Price: USD $23,900
Where does the power come from in a cat engine?
A CAT Engine takes three different 12 volt power supply wires to the ECM. 1) keyed from the ignition switch to pin 70, 2) 12 volt battery power to pin 52, 3) 12volt battery power pin 53 Usually pin 52 and 53 are feed power from the battery on one wire that splits before the two pins at the ECM.
Is there a problem with my 2006 Pete?
I bought a new 2006 Pete last year in March and I have been having a problem with this engine since I hit about 95,000 miles (2 months ago) This truck has been to 3 different shops, and all three shops know that the truck is missing but can’t seem to find the problem.
When to troubleshoot a Peterbilt electrical panel?
For example, white is grounded and red is protected up to 12 volts. If you’re experiencing problems with your instrument panel or sensors, troubleshooting your electrical panel is the first place to begin looking for a solution.
How can I Reset my Peterbilt circuit breaker?
Peterbilt circuit breakers can either be reset by a switch located in the electrical panel or by unplugging the entire circuit and plugging it back in. You can also consider replacing it with an automatically resetting circuit breaker. Check for corrosion.
When does a wiring schematic show no power?
Generally speaking, a wiring schematic shows the condition of a piece of equipment when there is no power being applied to the unit.Therefore, if a switch is depicted as being normally open(N/O) or normally closed(N/C), remember that the position of the switch is shown as it appears when there is no power applied to that circuit.
What do the symbols on a wiring schematic mean?
SWITCH SYMBOLS Generally speaking, a wiring schematic shows the condition of a piece of equipment when there is no power being applied to the unit.Therefore, if a switch is depicted as being normally open (N/O) or normally closed (N/C), remember that the position of the switch is shown as it appears when there is no power applied to that circuit.
Where are the pins on a power stroke IDM?
So I then started testing the wiring and found that pins 23 and 26 on the idm plug have Do you have a copy of the engine control wire schematic?. – L Power Stroke Diesel – Checking A ‘s IDM And Injector Wiring – Below I still have the raw photo and the wiring diagram.